Cutters

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 6mm, tolerance h10 Length of working part: 15,0mm Total length: 57mm Screw : 45Â ° Clamping shank: 6mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of working part: 3mm Length of working part: 9.0mm Total length: 75mm Screw: 55° Clamp shank: 4mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of the working part: 6mm Length of the working part: 18.0mm Total length: 100mm Screw: 55° Clamping shank: 6mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of the working part: 12mm Length of the working part: 36.0mm Total length: 100mm Screw: 55° Clamping shank: 12mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

APGT 1604PDER ALU PL05, VBD milling cutter for milling aluminum, copper and their alloys Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Original Pack Usage: Aluminum, Copper, Plastics These VBDs are Fully compatible with VBD type APKT 1604 and APKX 1604 Vc: 210-1150 m / min fz: 0,09-0,40 mm ap: 15mm

Interchangeable milling insert APKT 100308PDTR M01, insert for milling Radius: 0.8mm Usage: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbides The price is for 1 piece, not for the whole package, if you want to buy the whole package , put 10pcs in the basket.

Interchangeable milling insert APKT 100312PDTR M01, insert for milling Radius: 1.2mm Usage: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbides The price is for 1 piece, not for the whole package, if you want to buy the whole package , put 10pcs in the basket.

Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Application: Steel, stainless steel, cast iron, non-ferrous metals, superalloys, carbide Cutting conditions - see enclosed PDF sheet

Milling insert VBD APKT 1003 PDER - 05 Coating: PVD, TiAlN Series JC8050: Stiffer substrate, excellent resistance to chipping and high temperatures. Suitable for intermittent cutting when machining hard steels, stainless steels and heat-resistant alloys. Use: universal, also suitable for highly hardened steel Steel: P25-P40 Stainless steel: M25-M40 Superalloys: S20-S40 Regular conditions - see the attached photo The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replaceable milling insert APKT 160408PDER-AL CA1000, suitable replacement for APGT 1604PDER insert Radius: 0.8mm Coating: uncoated, polished surface CA1000 Series: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Vc = 200-800 m / min. fz = 0.1-0.3 mm / rev. Type AL: Very sharp breaker for machining aluminum and plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart.

Interchangeable milling insert APKT 1604PDER - DCM, VBD for milling Very low cutting resistance due to the geometry of the cutting edge, high quality of the machined surface. The plate is coated, suitable for ordinary steel or stainless steel Dimensions: l=17mm d=9.4mm s=5 .67mm d1=4.6mm Original packaging Usage: suitable for machining steels without coolant at high cutting speeds Classical steel: P20-P35 Stainless steel: M20-M30 These VBDs are fully compatible with APKX 1604 type VBDs The price shown is for 1pc, not for the whole pack, if you want to buy the whole pack , put 10 pcs.in the basket

Interchangeable milling insert APKT 1604PDER , VBD for milling CVD coating , TiCN-Al2O3 Very low cutting resistance due to the geometry of the cutting edge, high quality of the machined surface. The insert is coated, has a long service life even when milling hard-to-machine (high-alloy) steels. Dimensions: l=17mm d=9.4mm s=5.67mm d1=4.6mm Original packaging Usage: suitable for machining steels without coolant at high cutting speeds Classical steel: P15-P30 Cast iron: K15-K25 Stainless steel: M15 -M25 These VBDs are fully compatible with APKX 1604 type VBDs Contains 10.5% cobalt, grain 1-2um, hardness HV30 : 1400 Specified the price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.