Cutters

Unused - symmetrical double-sided angled end mill with underturned teeth Angle: 30° Diameter of the cutter: 160mm Diameter of the clamping hole: 32mm Width: 25mm Number of teeth: 22 Radius at the top: R2.5 Material: HSS - High-speed steel ČSN 222252.1 / 22 2252.1 Resale - over-standard stocks

Force screw in the knife holder. Thread Size: M2 Head: TORX 6 Overall length of bolt (with head): 5mm

Interchangeable ADKT 1505PDER SCM BH68TL Milling Cutter, VBD for Milling Very low cutting resistance due to cutting edge geometry, high quality machined surface. Plate is coated, it has a high lifetime even when milling of workable (high alloy) steels. Dimensions: l = 15,55mm d = 9,525mm s = 5,6mm d1 = 4,4mm Original Packaging Usage: Steel, stainless steel, cast iron

Interchangeable ADKX 1505PD-R; 4020, VBD for milling Plate is coated, it has a high lifetime even when milling of workable (high alloy) steels. Dimensions: l = 15,55mm d = 9,525mm s = 5,6mm d1 = 4,4mm Original Packaging Usage: Steel: P25-P40; 255-190 rpm; 0,05-0,12 m / t; 1,0-9,0 mm Stainless steel: M25-M40; 150-110ot / min; 0,05-0,12 m / t; 1,0-6,8 mm Cast iron: K25-K40; 240-180 rpm; 0,05-0,12 m / t; 1.0-9.0 mm Supersulins S20-S30; 75-35 rpm; 0,05-0,12 m / t; 1.0-5.4 mm

Front and corner cutter / insert insert holder - for VBD PRAMET / ISCAR APKT 1003 Diameter: 20mm Angle: 90 ° Number of bits: 3 Clamping diameter: 20 mm Overall length: 100 mm Working length: 30 mm Blade height VBD: 10mm Screws: M2,5 x 7mm / T8 Type VBD: 1) APKT 1003 2) APKX 1003 APK 1003 2) APKX 1003 - solution for your production. Heat-treated milling body material, special heat-resistant and aggressive coating, precision machining of the body and insert bush, internal cooling of the tool and connecting material from the Swiss manufacturer SFS guarantee the quality and long life of AKKO tools. Kat. No. AEM90-AP10-D20-W20-L100-Z03-H

Front and corner cutter / insert insert holder - for VBD PRAMET / ISCAR APKT 1003 * Length 150mm without internal cooling! Diameter: 20mm Angle: 90 ° Number of Cuts: 3 Clamping Diameter: 20 mm Overall Length: 150 mm Working Length: 50 mm VBD: 10mm ) APKX 1003 Packaging is free of VBD AKKO MAKINA squeegee cutters are an economic and also a high quality solution for your production. Heat-treated milling body material, special heat-resistant coating and aggressive materials, precision machining of the body and insert bush, and the Swiss SFS joint material guarantee the quality and long life of AKKO tools. Kat. No. AEM90-AP10-D20-W20-L150-Z03-H

Front and corner cutter / insert holder for VBD PRAMET / ISCAR APKT 1604 Diameter: 40mm Angle: 90 ° Number of edges: 4 Clamping diameter: 32 mm Overall length: 110 mm Working length: 40 mm < b> VBD Type: 1) APKT 1604 2) APKX 1604 1) for your production. Heat-treated milling body material, special heat-resistant and aggressive coating, precision machining of the body and insert bush, internal cooling of the tool and connecting material from the Swiss manufacturer SFS guarantee the quality and long life of AKKO tools. Kat. No. AEM90-AP16-D40-W32-L110-Z04-H

Front and corner milling head AKKO MAKINA for insertable inserts - VBD PRAMET / ISCAR APKT 1003 Diameter: 50 mm Angle: 90 ° Number of blades: 6 Clamping diameter : 22 mm Overall height: 40 mm Type VBD: 1) APKT 1003 - manufacturer of VDT / LAMINA / PRAMET / ISCAR 2) APMT 1003 - manufacturer SECO Packaging is free of VBD AKKO MAKINA squeegee cutters are an economic and also a high quality solution for your production. Heat-treated milling body material, special heat-resistant and aggressive coating, precision machining of the body and insert bush, internal cooling of the tool and connecting material from the Swiss manufacturer SFS guarantee the quality and long life of AKKO tools. Kat. No .: AFM90-AP10-D50-A22-Z06-H

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 10mm, tolerance h10 Length of working part: 24,0mm Total length: 72mm Screw : 45Â ° Clamping shank: 10mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 12mm, tolerance h10 Length of working part: 28,0mm Total length: 83mm Screw : 45Â ° Clamping shank: 12mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 3mm, tolerance h10 Length of working part: 9,0mm Total length: 38mm Screw : 45Â ° Clamping shank: 3mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide(TK) corner milling cutter for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steel Number of pieces: 3bA… â „c. Diameter of working part: 4mm, tolerance h10 Length of working part: 12,0mm Total length: 50mm Screw: 45A ‚Â ° Clamping shank: 4mm, tolerance h6,(weldon flat on request) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through the roof ed Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping A… Ëo Cutting conditions - see attached photo