Cutters

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Other dimensions - see product description for individual variants Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide ( TK ) milling cutter, hollow - convex - made of cemented carbide Number of blades: 4 blades. Radius: according to the selected variant Helix angle: 0° Head angle: 0° Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S360002

Carbide ( TK ) multifunctional / universal milling cutter made of cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h6 Coating: according to the chosen variant of the variant Apex angle: 90° Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S390002.090 (AlTiN)

Carbide (TK) grooving toric cutter for grooving with corner radius Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for finishing operations Structural steels up to 500 N / mm2 Suitable for machining cast iron, non-ferrous metals, light and heavy metals, plastics, aluminum alloys, non-ferrous metals and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) grooving toric cutter for milling corners with corner radius and diamond coating for milling materials with HRC

Carbide (TK) torus cutter with corner radius Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for finishing operations Structural steels up to 500 N / mm2 Suitable for machining cast iron, non-ferrous metals, light and heavy metals, plastics, aluminum alloys, non-ferrous metals and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) torus cutter with corner radius and diamond coating for milling materials with HRC

Carbide (TK) taper milling cutter with corner radius for milling materials with HRC

Carbide (TK) taper milling cutter with corner radius for milling materials with HRC

Carbide ( TK ) milling cutter for milling, grooving, contouring of composite materials / without front edges / series 116001 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with front edges / series 116002 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with two front edges / series 116003 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.