Cutters

Carbide ( TK ) cutter - from cemented carbide, 1 cutting edge through the center - suitable for ALU, AL-alloys and non-ferrous metals Number of blades: 3 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Version without weldon surface / with weldon surface: depending on the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Coating: without coating Usage: Type W - for machining soft tools, e.g. aluminum and non-ferrous metals. Aluminum, Al-Si alloys (Si < 6%) Al-Si alloys (Si < 12%) Copper, copper alloys, brass and bronze Cutting conditions - see attached photo or catalog sheet Order no. no.: series S111402 and S111412

Carbide ( TK ) cutter - from cemented carbide, 1 cutting edge through the center - suitable for ALU, AL-alloys and non-ferrous metals Number of blades: 3 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Corner radius: according to the selected variant Version without weldon surface / with weldon surface: depending on the selected variant Other dimensions - see product description for individual variants Helix angle: 44-46° Head angle: 15° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining of Al alloys with a lower Si content, or machining of plastics and copper. Usage: Type W - for machining soft tools, e.g. aluminum and non-ferrous metals. Aluminum, Al-Si alloys (Si < 6%) Al-Si alloys (Si < 12%) Copper, copper alloys, brass and bronze Cutting conditions - see attached photo or catalog sheet Order no. No. : series S111402R and S111412R

Carbide ( TK ) cutter for milling grooves, short - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Standard: ZPS-FN Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Aluminium, Al-Si alloys with Si content < 6% with strength up to 400N/mm2 Al-Si alloy with Si content

Carbide (TK) roughing end mill for milling (grooves), long - made of cemented carbide, suitable for aluminum and non-ferrous materials Number of blades: 3 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 25° Head angle: 15° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Non-ferrous metals up to 250 MPa Aluminum alloys up to 530 MPa Type WR: For roughing materials with lower to medium strength. Cutting conditions - see attached photo Order no. No. - series: S115402

Carbide ( TK ) roughing cutter short - made of cemented carbide Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Standard: DIN6527K, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Air cooling. Coating: PVD ( AlCrN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S118602N

Carbide ( TK ) roughing cutter long - made of cemented carbide Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527K, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Air cooling. Coating: PVD ( AlCrN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S119602N

Carbide ( TK ) roughing cutter long - from cemented carbide with weldon surface Number of blades: according to the selected variant Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527K, DIN 6535 HB Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S119612

Carbide ( TK ) milling cutter for universal milling, long - made of cemented carbide Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA or DIN6535 HB Carbide: K30 F - ultra-fine grain carbide, high hardness and abrasion resistance, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Suitable also for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo Order no. No. - series: S121602 and S121612

Carbide ( TK ) universal milling cutter short - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Hardened steel up to 60HRC - up to 2210 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141612R

Carbide ( TK ) universal milling cutter long - from cemented carbide, two cutting edges in the center Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 35° / 38° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6527L Coating: PVD ( AlTiN ) Usage : Automatic and structural steel (group 1) up to 600 MPa Automatic and structural steel (group 3) up to 1100 MPa Automatic and structural steel (group 5) up to 1100 MPa Stainless steel (group 1) up to 750 MPa Stainless steel (group 2) 750-850 MPa Cast iron (group 1) up to 820 MPa Cast iron (group 2) above 800 MPa Refractory steel (Cr-Ni alloys) up to 1500 MPa Refractory steel (Titanium and its alloys) up to 1250 MPa Hardened steel up to 54HRC - up to 1920 MPa Cutting conditions - see attached photo or catalog sheet Order no. No. - series: S141612X

Carbide ( TK ) milling cutter for trochoid milling long - from cemented carbide, two cutting edges in the center Number of blades: 5 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Corner radius: according to the selected variant, possibly with a bevel of 45° 0.1-0.5mm Helix angle: 41° / 42° Head angle: 10° Other dimensions - see the attached catalog sheet Standard: DIN6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Stainless steels (group 1) up to 750 MPa Stainless steels (group 2) 750-850 MPa Titanium and titanium alloys up to 1250 MPa Cutting conditions - see attached photo Order no. No. - series: S143502T

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 60 ° Helix angle: 0 ° Forehead angle: 0 ° Other dimensions - see product description for individual variants Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo