Cutters

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Order no. code - series: 124518 and 125518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR-P : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. Order no. code - series: 124518P and 125518P

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518 and 129518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR-F: For machining materials with medium to higher strength (up to 1200 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the functions of a roughing and finishing tool. Order no. code - series: 128518P and 129518P

Unused - asymmetrical double-sided angle socket cutter Angle: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222244 / 22 2244 or its extension by custom production Resale - excess stock

Plug-in fine tooth milling cutter - cast Diameter: according to the chosen variant Height: according to the chosen variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Material: HSS - cast ground cutter Standard: ČSN 222158 Usage : Structural and cast steels up to 800 MPa

Asymmetric double-sided angled end mill with underturned teeth These cutters are used because of the advantage of maintaining their shape even after face grinding. This is a simplified version of the cutter ČSN 222244 - see photos Angle: according to the selected variant Diameter of the cutter: according to the selected variant Diameter of the clamping hole: according to the selected variant Corner radius: according to the selected variant Other dimensions: see product description for individual variants Material: HSS - High-speed steel Custom production, atypical size, lower sub-level of standard ČSN 222244 / 22 2244 Usage: ordinary steel and non-sticky metal alloys Characteristics of these cutters: An underturned tooth is stronger and dissipates heat better from the cutting edge. Due to the angle of the back and the straight face, there is a significantly greater cutting resistance when cutting directly than with ČSN 222244 cutters. They are easily resharpened Resale - excess stock, unused

APMT 15T3 PDR - F56 WMG40 Cat. No. 0412827788

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSE-PM, AlTiN polish Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 124517 and 125517

Roughing extra short end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Extra short row => higher stiffness Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518S

Plug-in fine tooth milling cutter - cast Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Helix angle: 45° Head angle: 12° Material: HSSE - cast cobalt ground cutter Standard: PN 222054 / ČSN 22 2054 Usage : Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron above 240 HB Stainless steel up to 850 MPa

Plug-in fine tooth milling cutter - cast Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 25° Head angle: 12° Other dimensions - see the attached catalog sheet Material : HSSE (i.e. HSS + Co5 ) - cast ground mill Standard: PN 222054 / ČSN 22 2054, DIN1880 H, ISO 2780/2586 Type H : Intended for milling (finishing) materials of medium to higher strength (up to 1200 Mpa). Machining Ra 3.2; exceptionally even 1.6 Usage : Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron above 240 HB Stainless steel up to 850 MPa Order no. code - series: 630973