Countersinking and needling

Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant Standard: without standard, replacement for DIN335 (* geometry is the same, for some diameters the length of the clamping shank is different)

coated Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant Standard: DIN 335 C

Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant Coating: TiN - Titanium nitride Standard: without standard, replacement for DIN335 (* geometry is the same, for some diameters the length of the clamping shank is different)

Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS or HSSE (HSSE = HSSCo5) - according to the selected variant Coating: TiN - Titanium nitride Standard: DIN 335 C

Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSSE-VA - cobalt high-speed steel with vanadium admixture Coating: oxidation Standard: DIN 335 C

3bř. conical countersink made of cobalt sintered steel, finely ground with CBN disc Maximum diameter: according to the selected variant Minimum diameter: see product description for selected variant Clamping shank: see product description for the selected variant, with three anti-rotation surfaces Edge angle: 90st. Overall length: see product description for selected variant Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: HSSE-PM - sintered powder cobalt high speed steel Standard: DIN335 C Usage: Alloy steel with tensile strength up to 1400N / mm2 Stainless steel with tensile strength up to 900N / mm2 Gray cast iron Aluminum alloys with silicon content> 10% Copper, brass, plastics Hardox, Hastelloy, Inconell, Nimonic and other special alloys Features: Excellent chip evacuation, cutting edge, resulting surface without scratches, excellent tool-hole centering The countersink grooves are ground with a CBN wheel, which makes the cutting edge sharper and smoother compared to conventional countersinks where the grooves are milled. The cutting edge is always the highest point of the diameter, ie during countersinking the material does not rub against the wall of the countersink, which reduces the required cutting force and also reduces the heat generated -> which increases the service life of the countersink.

Tvrdokovový 3bř. countersink Maximum diameter: according to the selected variant Minimum diameter: see product description for selected variant Clamping shank: see product description for the selected variant, with three anti-rotation surfaces Edge angle: 90st. Overall length: see product description for selected variant Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: carbide (diameter 4.3 to 11.5 all-carbide design, 12.4-31 mm carbide head with brazed shank made of tool steel) Standard: DIN335 C Usage: Hardened steel up to 50 HRC Alloy steel with tensile strength up to 1400N / mm2 Stainless steel with tensile strength up to 900N / mm2 Gray cast iron Aluminum alloys with silicon content> 10% Copper, brass, plastics Hardox, Hastelloy, Inconell, Nimonic and other special alloys Features: Excellent chip evacuation, cutting edge, resulting surface without scratches, excellent tool-hole centering The countersink grooves are ground with a fine diamond wheel, which makes the cutting edge sharper and smoother compared to conventional countersinks where the grooves are milled. The cutting edge is always the highest point of the diameter, ie during countersinking the material does not rub against the wall of the countersink, which reduces the required cutting force and also reduces the heat generated -> which increases the service life of the countersink.

Carbide conical countersink for Hardox Maximum diameter: according to the selected variant Blade angle: 90°. Number of blades: 5 (with a diameter of 10.4 mm there are 4 blades) Other dimensions - see the attached catalog sheet Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: carbide (diameter 10.4 all carbide design, 12.4-31mm carbide head with brazed tool steel shank) Usage : Hardox 400, Hardox 450, Hardox 500 Hardened steel up to 60 HRC Alloyed steel with tensile strength up to 1400N/mm2 Stainless steel with tensile strength up to 900N/mm2 Gray cast iron Graphite, carbon and plexiglass, reinforced plastics Hastelloy, Inconell, Nimonic and other special alloys with strength above 850 N/mm2 Warning - carbide / carbide countersinks should only be used on NC/CNC machines. Properties : Excellent chip evacuation, the edge does not chip, the resulting surface is scratch-free, excellent tool-hole centering The countersink grooves are ground with a fine diamond wheel, making the edge sharper and smoother compared to conventional countersinks where the grooves are milled. The cutting edge is always the highest point of the diameter, i.e. when countersinking, the material does not rub against the wall of the countersink, which reduces the necessary cutting force and also reduces the generated heat -> which increases the service life of the countersink. Cat. no. : 403045 / 40 3045

Three-edged taper countersink with long clamping shank Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSSE / HSSCo5 - High speed steel + 5% Co5 Standard: DIN 335 C XL

Conical countersink with one cutting edge Max. diameter: according to the selected variant Number of edges: 1 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS - high speed steel

3bř. taper countersink bit for cordless drill Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: hexagon 1/4 "(6.35mm) Blade angle: 90st. Material: HSS - high speed steel

3bř. taper countersink bit for cordless drill Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: hexagonal 1/4 "(6.35mm) with locking for quick release Blade angle: 90st. Material: HSS - high speed steel