Core and core drills

Centering pin for core drill - usable for core drills of the series: HARD-LINE 150(first in order for diameters 18-19mm) Cat. no.: 20.1429

Centering Pin for Core Drilling - Used for Core Drills Series: HARD-LINE 80 Cat. No .: 38720.1439

Cutter - core drill bit, set of six top drills and four centering pins Karnasch SILVER-LINE 25 in practical case Set includes drills: 12 , 14, 16, 18, 20, 22 mm Set of centering pins: 6,34 x 77 mm (2pcs) Recommended drilling depth - max. - HSS-XE - Special High Alloy Steel Hardness of Teeth: 68HRC Cat. No.: 38720.1474 These core drills are made of special HSS-XE high-alloy steel, extreme hardness on tooth tips (up to 68 HRC), high wear resistance and long durability. Only a few manufacturers are able to produce HSS hardened core drills in several stages. hard tooth tips (68 HRC) and flexible and durable drill body. HSS-XE / ASP j core drills For different diameters and drilling depths, five different geometry of the drill are applied, so that the result of the work is always perfect.

Cutter - core drill bit, set of six top drills and four centering pins Karnasch SILVER-LINE 50 in practical case Set includes drills: 14, 16, 18, 20, 22, 26 mm Set of centering pins: 6,34 x 102 mm (2pcs) Recommended drilling depth - max 50 mm Material - HSS-XE - Special High-Alloy Steel Hardness of Teeth: 68HRC Cat. No.: 38720.1475 These core drill bits are made of special HSS-XE specially alloyed steel, extreme hardness on tooth tips (up to 68 HRC), high wear resistance and long durability. Only a few manufacturers are able to produce HSS hardened core drills in several stages. hard tooth tips (68 HRC) and flexible and durable drill body. HSS-XE / ASP Core Drills different drilling geometries are applied for different drilling diameters and depths so that the result of the work is always perfect.

Two-part centering pin for core drill - usable for core drills of the series: HARD-LINE 110(for diameters 56-120mm) Cat. no.: 20.1486

Crown drill / puncher / drill bit bi-metal, jigsaw 201500060 Diameter: 60 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500068 Diameter: 68 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500089 Diameter: 89 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500160 Diameter: 160 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500210 Diameter: 210 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500233 Diameter: 233 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Crown drill / puncher / drill bit bi-metal, jigsaw 201500279 Diameter: 279 mm Max. drilling depth: 38mm Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals - From 160mm onwards, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. Co8 with fine gearing Fine gearing is very well suited for metals It ensures a quieter run and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. Suitable for alloy and common steels( up to strength 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.