Collets

Set of 12 sealed collets ER 25 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the application © image. Standard: DIN 6499 C / 430EC Tools with internal cooling are not manufactured with a shank smaller than 3mm, therefore this set starts from 3mm diameter.

Set of 18 sealed collets ER 32 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collet clamping procedure: The collet clicks into place Insert into the clamping nut - according to the enclosed figure. Standard: DIN6499C / 470EA Tools with internal cooling with a shank smaller than 3mm are not manufactured, therefore this set starts from 3mm.

Varnished wooden binder for ER 16 collet 10 holes

Varnished wooden binder for ER 16 collet 12 holes

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes

Varnished wooden binder / base for ER 40 collet 23 holes

12, , 7 mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Set of 8 pcs of sealed collet ER 16 for use with tools with internal cooling, ER16 collet Diameters: 3, 4, 5, 6, 7, 8, 9, 10 mm Procedure clamp clamping: Click the clamp nut into the clamping nut - according to the attached picture.

Set of 12 pieces of ER 16 on wooden board, ER16 collet Diameters: 1, 1,5, 2, 2,5, 3, 4, 5, 6, 7, 8, 9, 10 mm Clamp Clamping Range: 1mm: 0,5-1,0 mm 2mm: 1,5-2,0 mm 3mm: 2,0-3,0 mm 4mm : 3,0-4,0 mm ... etc. 10mm: 9,0-10,0 mm Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. We recommend to buy a 1.5mm collet

Set of 13 pieces ER20 on wooden board, ER20 collet Set contains diameters: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm < Collet clamping procedure: Click the clamping nut into the clamping nut - as shown in the picture.