Collet clamp ISO50 x ER16 DIN69871 - 100mm, G2.5/25,000rpm.
| ISO30 x ER11M - 63mm |
In stock
(2x)
|
45,04 € with VAT |
| ISO30 x ER16 - 63mm |
On request
|
45,04 € with VAT |
| ISO30 x ER16M - 63mm |
In stock
(3x)
|
45,04 € with VAT |
| ISO30 x ER20 - 60mm |
On request
|
45,04 € with VAT |
| ISO30 x ER25 - 63mm |
In stock
(8x)
|
45,04 € with VAT |
| ISO30 x ER32 - 63mm , G2.5/25.000 rpm |
In stock
(5x)
|
45,04 € with VAT |
| ISO40 x ER11M - 60mm , G2.5/25.000rpm |
In stock
(14x)
|
48,73 € with VAT |
| ISO40 x ER11M - 100mm , G2.5/25.000rpm |
In stock
(11x)
|
44,55 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/20.000 rpm |
On request
|
59,96 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/25.000 rpm |
In stock
(9x)
|
51,72 € with VAT |
| ISO40 x ER16 - 70mm , G2.5/25.000 rpm |
In stock
(18x)
|
43,17 € with VAT |
| ISO40 x ER16M - 70mm , G2.5/25.000 rpm |
In stock
(1x)
|
51,52 € with VAT |
| ISO40 x ER16 - 100mm , G2.5/25.000 rpm |
In stock
(12x)
|
51,52 € with VAT |
| ISO40 x ER16M - 100mm , G2.5/25.000 rpm |
On request
|
51,52 € with VAT |
| ISO40 x ER16 - 160mm , G2.5/30.000 rpm |
On request
|
55,15 € with VAT |
| ISO40 x ER16M - 160mm G2.5/25.000 rpm |
In stock
(34x)
|
53,40 € with VAT |
| ISO40 x ER20 - 60mm |
In stock
(12x)
|
41,20 € with VAT |
| ISO40 x ER20 - 70mm G2.5/25.000 rpm |
In stock
(20x)
|
41,73 € with VAT |
| ISO40 x ER25 - 70mm |
On request
|
40,70 € with VAT |
| ISO40 x ER25 - 70mm G2.5/20.000 rpm |
In stock
(54x)
|
42,89 € with VAT |
| ISO40 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(16x)
|
49,10 € with VAT |
| ISO40 x ER25 - 160mm , G2.5 / 25.000 rpm |
In stock
(7x)
|
76,41 € with VAT |
| ISO40 x ER32 - 70mm |
On request
|
41,15 € with VAT |
| ISO40 x ER32 - 70mm , G2.5/30.000 rpm |
In stock
(99x)
|
41,15 € with VAT |
| ISO40 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(11x)
|
54,16 € with VAT |
| ISO40 x ER32 - 150mm , G2.5/25.000 rpm |
In stock
(7x)
|
62,12 € with VAT |
| ISO40 x ER40 - 70mm |
In stock
(1x)
|
43,79 € with VAT |
| ISO40 x ER40 - 70mm , G6.3/15.000rpm |
In stock
(3x)
|
44,52 € with VAT |
| ISO40 x ER40 - 100mm |
In stock
(6x)
|
50,37 € with VAT |
| ISO40 x ER40 - 150mm |
In stock
(11x)
|
51,13 € with VAT |
| ISO40 x ER50 - 80mm |
In stock
(18x)
|
38,55 € with VAT |
| ISO40 x ER50 - 100mm , G2.5/25.000 rpm |
In stock
(12x)
|
75,17 € with VAT |
| ISO50 x ER25 - 100mm |
On request
|
67,14 € with VAT |
| ISO50 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(10x)
|
75,17 € with VAT |
| ISO50 x ER32 - 80mm |
On request
|
63,80 € with VAT |
| ISO50 x ER32 - 80mm , G2.5/30.000rpm |
On request
|
68,85 € with VAT |
| ISO50 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(9x)
|
70,42 € with VAT |
| ISO50 x ER32 - 160mm |
In stock
(2x)
|
71,17 € with VAT |
| ISO50 x ER32 - 160mm , G2.5/30.000rpm |
In stock
(4x)
|
88,96 € with VAT |
| ISO50 x ER40 - 80mm |
In stock
(9x)
|
74,48 € with VAT |
| ISO50 x ER40 - 80mm , G2.5/30.000rpm |
In stock
(3x)
|
72,47 € with VAT |
| ISO50 x ER40 - 100mm , G2.5/30.000rpm |
On request
|
77,71 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000005352462
- Warranty:
- 24 months
- Code:
- DIN69871-50-ER16-100L-25k
Product information
ISO50xER16 ( 50xER16 )
Length from cone to clamp: 100mm
Max. collet size: 10mm
Thread for pull-in screw/pin: M24
For collets with outer diameter: 16mm
Diameter of clamping nut: hexagon 25mm
Design of clamping shank for car. replacement: DIN
ER16 collets can be purchased additionally.
Throwability: up to 0.005mm
Balance: G2.5 / 25,000 rpm.
Standard: DIN 69871
Procedure for clamping the collet:
Snap the collet into the clamping nut - according to the attached picture.
Variants
Accessories
-
Set of collets ER16 - 1-10mm(12pcs), accuracy 0.015mm, DIN6499B
Set of 12 pieces of ER 16 on wooden board, ER16 collet Diameters: 1, 1,5, 2, 2,5, 3, 4, 5, 6, 7, 8, 9, 10 mm Clamp Clamping Range: 1mm: 0,5-1,0 mm 2mm: 1,5-2,0 mm 3mm: 2,0-3,0 mm 4mm : 3,0-4,0 mm ... etc. 10mm: 9,0-10,0 mm Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. We recommend to buy a 1.5mm collet
In stock84,76 € with VAT -
Set of sealed collets ER16 - 3-10mm(8pcs)
Set of 8 pcs of sealed collet ER 16 for use with tools with internal cooling, ER16 collet Diameters: 3, 4, 5, 6, 7, 8, 9, 10 mm Procedure clamp clamping: Click the clamp nut into the clamping nut - according to the attached picture.
In stock120,49 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!