Collet chucks with flange

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Handle: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Proma SM 300 E

Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm Running: up to 0,005mm Collets can be purchased separately as needed. Colts are not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Running: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Collet universal chuck for 5C collets with Camlock size 3 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D3 ( Cone diameter Dmax=53.90mm ; 3x pin on circle 70.60mm) Clamp height: 123mm Total height including D3 pins: 150mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Collet universal chuck for 5C collets with Camlock size 6 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D6 ( Cone diameter Dmax=106.30mm ; 6x pin on a circle 133.40mm) Clamp height: 145mm Total height including D5 pins: 190mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Collet universal chuck for 5C collets with Camlock size 8 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D8 ( Cone diameter Dmax=139.70mm ; 6x pin on a circle 171.40mm) Clamp height: 155mm Total height including D5 pins: 195mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.

Collet chuck for collet 5C, without flange Clamping ranges: Clamps 5C round: 1-28mm Collets 5C square: 3-19mm Collets 5C hexagon: 3-22mm Parameters: Diameter: 126mm Height: 107,2mm M8 Bolt Axis: 107mm Flange Mount: 95mm Speed : 6000 rpm Application: This chuck chuck is suitable for lathes and grinders and is assembled using a suitable flange (eg Camlock D 1-4 ") ...................................

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handlery: up to 0.005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Passes directly on the lathe flange: - ASIST PLATINUM PRO AE4S50M MINI LATHE - Proma SM 300 E

Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm < Collet clamping procedure: Click the clamping nut into the clamping nut - as shown in the picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0,005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0.005mm Other bracelets can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck