Collet chucks and collets

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes

Varnished wooden binder / base for ER 40 collet 23 holes

Threaded nut for collet chuck ER 25 Outer diameter: 42mm Nut width: 20mm Inner diameter (threaded): 30,5mm Thread M32x1,5 < br> Opening: 21,4mm Matrix has internal bearing and gasket to prevent dust and dirt from entering the collet / clamps DIN6499 Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Collet holder HSK F 63 ER 40 - 75 mm Type HSK F63 ER40 AD - cooling guided through the center Length from cone to holder: 75mm Max. collet size: 30mm For collets with outer diameter: 40mm Diameter of clamping nut: 62mm Clamping stem design for aut. replacement: DIN69893 F ER40 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip) Cat. no.: F63.02.26

Regofix collet chuck HSK-A 63 x ER32 - 100mm Type HSK A63 ER32 AD - center-cooled cooling Length from cone to chuck: 100mm Max. collet size: 20mm For collets with outer diameter: 32mm Clamping nut diameter: 49mm Clamping shank design for cars. exchange: DIN69893 A ER32 collets can be purchased separately. Throw: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 There is a hole in the collar for a data carrier according to DIN69873(Balluffchip)

Morse Clamp Clamp MK 2 x ER32 6 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse Clamp Clamp MK 2 x ER32 15 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp Clamp with MK 3 x ER 20 8 Clamps MK3xER20 (3xER20) Clamping Thread in Cone M12 Max. collar size: 13mm Other collet sizes can be purchased separately Contains collet: 1,5-2mm; 2-3mm; 3-4mm; 4-5mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm Supplied in Plastic Trunk Thread: up to 0.005mm Clamping Procedure: Fasten the clamp nut to the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with MK Cone MK 3 x ER 25 6 Clamps MK3xER25 (3xER25) Clamping Thread in Cone M12 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with morse cone MK 3 x ER 32 MK3xER32 (3xER32) Max. Collar Size: 20mm Bolt Threaded Bolt / Bolt: M12 Bolt Nut Diameter: 49mm For Collet Outer Diameter: 32mm Thread: up to 0.005mm ER32 Collet Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with Morse Cone MK 3 x ER 32 6 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case < :