Collet chuck ISO50 x ER40 DIN69871 - 80mm , G2.5/30.000rpm
| ISO30 x ER11M - 63mm |
In stock
(2x)
|
44,93 € with VAT |
| ISO30 x ER16 - 63mm |
On request
|
44,93 € with VAT |
| ISO30 x ER16M - 63mm |
In stock
(3x)
|
44,93 € with VAT |
| ISO30 x ER20 - 60mm |
On request
|
44,93 € with VAT |
| ISO30 x ER25 - 63mm |
In stock
(8x)
|
44,93 € with VAT |
| ISO30 x ER32 - 63mm , G2.5/25.000 rpm |
In stock
(5x)
|
44,93 € with VAT |
| ISO40 x ER11M - 60mm , G2.5/25.000rpm |
In stock
(14x)
|
48,61 € with VAT |
| ISO40 x ER11M - 100mm , G2.5/25.000rpm |
In stock
(11x)
|
44,43 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/20.000 rpm |
On request
|
59,81 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/25.000 rpm |
In stock
(9x)
|
51,58 € with VAT |
| ISO40 x ER16 - 70mm , G2.5/25.000 rpm |
In stock
(18x)
|
43,06 € with VAT |
| ISO40 x ER16M - 70mm , G2.5/25.000 rpm |
In stock
(1x)
|
51,39 € with VAT |
| ISO40 x ER16 - 100mm , G2.5/25.000 rpm |
In stock
(14x)
|
51,39 € with VAT |
| ISO40 x ER16M - 100mm , G2.5/25.000 rpm |
On request
|
51,39 € with VAT |
| ISO40 x ER16 - 160mm , G2.5/30.000 rpm |
On request
|
55,01 € with VAT |
| ISO40 x ER16M - 160mm G2.5/25.000 rpm |
In stock
(34x)
|
53,25 € with VAT |
| ISO40 x ER20 - 60mm |
In stock
(13x)
|
41,10 € with VAT |
| ISO40 x ER20 - 70mm G2.5/25.000 rpm |
In stock
(20x)
|
41,62 € with VAT |
| ISO40 x ER25 - 70mm |
On request
|
40,60 € with VAT |
| ISO40 x ER25 - 70mm G2.5/20.000 rpm |
In stock
(54x)
|
42,79 € with VAT |
| ISO40 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(18x)
|
48,98 € with VAT |
| ISO40 x ER25 - 160mm , G2.5 / 25.000 rpm |
In stock
(7x)
|
76,22 € with VAT |
| ISO40 x ER32 - 70mm |
On request
|
41,06 € with VAT |
| ISO40 x ER32 - 70mm , G2.5/30.000 rpm |
In stock
(99x)
|
41,06 € with VAT |
| ISO40 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(13x)
|
54,01 € with VAT |
| ISO40 x ER32 - 150mm , G2.5/25.000 rpm |
In stock
(7x)
|
61,96 € with VAT |
| ISO40 x ER40 - 70mm |
In stock
(1x)
|
43,68 € with VAT |
| ISO40 x ER40 - 70mm , G6.3/15.000rpm |
In stock
(4x)
|
44,39 € with VAT |
| ISO40 x ER40 - 100mm |
In stock
(6x)
|
50,24 € with VAT |
| ISO40 x ER40 - 150mm |
In stock
(11x)
|
51,00 € with VAT |
| ISO40 x ER50 - 80mm |
In stock
(18x)
|
38,45 € with VAT |
| ISO40 x ER50 - 100mm , G2.5/25.000 rpm |
In stock
(12x)
|
74,97 € with VAT |
| ISO50 x ER25 - 100mm |
On request
|
66,97 € with VAT |
| ISO50 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(10x)
|
74,97 € with VAT |
| ISO50 x ER32 - 80mm |
On request
|
63,63 € with VAT |
| ISO50 x ER32 - 80mm , G2.5/30.000rpm |
On request
|
68,67 € with VAT |
| ISO50 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(9x)
|
70,24 € with VAT |
| ISO50 x ER32 - 160mm |
In stock
(2x)
|
70,99 € with VAT |
| ISO50 x ER32 - 160mm , G2.5/30.000rpm |
In stock
(4x)
|
88,73 € with VAT |
| ISO50 x ER40 - 80mm |
In stock
(9x)
|
74,28 € with VAT |
| ISO50 x ER40 - 80mm , G2.5/30.000rpm |
In stock
(3x)
|
72,29 € with VAT |
| ISO50 x ER40 - 100mm , G2.5/30.000rpm |
On request
|
77,51 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000005328689
- Warranty:
- 24 months
- Code:
- DIN69871-50-ER40-080L-30k
Product information
ISO50xER40 ( 50xER40 )
Length from cone to clamp: 80mm
Max. collet size: 30mm
Thread for pull-in screw/pin: M24
For collets with outer diameter: 40mm
Diameter of clamping nut: 62mm
Design of the clamping shank for cars. replacement: DIN
ER40 collets can be purchased additionally.
Throwability: up to 0.005mm
Balance: G2.5 / 30,000 rpm.
Standard: DIN 69871
Procedure for clamping the collet:
Snap the collet into the clamping nut - according to the attached picture.
Variants
Accessories
-
Precision ER40 collet , DIN6499B / 472E
Clamping collet series: ER 40 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 472E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 40mm Length: 46mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
9,60 € with VAT -
Sealed ER40 collet , DIN6499C / 472EA
Precision collet ER 40 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 472EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 40mm Length: 46mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
24,49 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!