Collet chuck ISO40 x ER25 DIN2080 - 60mm
| ISO30 x ER16 - 63mm |
In stock
(8x)
|
37,12 € with VAT |
| ISO30 x ER25 - 63mm |
In stock
(11x)
|
37,12 € with VAT |
| ISO30 x ER32 - 60mm |
In stock
(7x)
|
37,12 € with VAT |
| ISO40 x ER16M - 50mm |
In stock
(12x)
|
36,66 € with VAT |
| ISO40 x ER25 - 60mm |
In stock
(26x)
|
36,66 € with VAT |
| ISO40 x ER32 - 50mm |
In stock
(5x)
|
42,11 € with VAT |
| ISO40 x ER32 - 60mm |
In stock
(10x)
|
42,11 € with VAT |
| ISO40 x ER32 - 70mm |
On request
|
42,11 € with VAT |
| ISO40 x ER40 - 60mm |
In stock
(2x)
|
39,88 € with VAT |
| ISO40 x ER40 - 70mm |
On request
|
39,88 € with VAT |
| ISO40 x ER40 - 80mm |
In stock
(9x)
|
39,88 € with VAT |
| ISO50 x ER32 - 100mm |
In stock
(13x)
|
64,96 € with VAT |
| ISO50 x ER40 - 70mm |
In stock
(11x)
|
72,16 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000136777
- Warranty:
- 24 months
- Code:
- DIN2080-40-ER25-60L
Product information
ISO40xER25 (40xER25)
Length from cone to clamp: 60mm
Max. Collet Size: 16mm
Bolt Thread / Bolt: M16
For Collet Of Outer Diameter: 25mm
Clamp Nut Nut: 42mm
Collet ER25 Available.
Chassis: up to 0,005mm
DIN 2080, DIN 6499
Collet clamping procedure:
Fasten the clamp nut to the clamping nut - according to the attached picture.
Variants
Accessories
-
Precision ER25 collet , accuracy 0.005mm , DIN6499B+ UP / 430EP
Clamping collet series: ER 25 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 430EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
11,54 € with VAT -
Sealed ER25 collet , DIN6499C / 430EA
Precision clamping sealed collet ER 25 for drills / mills with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 430EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 25mm Length: 34mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
17,77 € with VAT -
Sealed ER25 tapping collet with square drive , DIN6499A
Sealed collet with internal square ER 25 / GER 25 / GER25 series for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
23,23 € with VAT -
Tapping ER25 collet with square drive , DIN6499A
ER 25 / GER 25 / GER25 series collet with internal square for machine taps Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
21,88 € with VAT -
Precision ER25 collet , DIN6499B / 430E
Clamping collet series: ER 25 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 430E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,10 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!