Collet chuck ISO40 x ER20 DIN69871 - 70mm G2.5 / 25,000rpm.
ISO30 x ER11M - 63mm |
In stock
(2x)
|
45,39 € with VAT |
ISO30 x ER16 - 63mm |
On request
|
45,39 € with VAT |
ISO30 x ER16M - 63mm |
In stock
(3x)
|
45,39 € with VAT |
ISO30 x ER20 - 60mm |
On request
|
45,39 € with VAT |
ISO30 x ER25 - 63mm |
On request
|
45,39 € with VAT |
ISO30 x ER32 - 63mm , G2.5/25.000 rpm |
In stock
(5x)
|
45,39 € with VAT |
ISO40 x ER11M - 60mm , G2.5/25.000rpm |
In stock
(14x)
|
49,10 € with VAT |
ISO40 x ER11M - 100mm , G2.5/25.000rpm |
In stock
(11x)
|
44,89 € with VAT |
ISO40 x ER11M - 150mm , G2.5/20.000 rpm |
On request
|
60,43 € with VAT |
ISO40 x ER11M - 150mm , G2.5/25.000 rpm |
In stock
(10x)
|
60,43 € with VAT |
ISO40 x ER16 - 70mm , G2.5/25.000 rpm |
On request
|
43,51 € with VAT |
ISO40 x ER16M - 70mm , G2.5/25.000 rpm |
In stock
(5x)
|
51,92 € with VAT |
ISO40 x ER16 - 100mm , G2.5/25.000 rpm |
On request
|
51,92 € with VAT |
ISO40 x ER16M - 100mm , G2.5/25.000 rpm |
On request
|
51,92 € with VAT |
ISO40 x ER16 - 160mm , G2.5/30.000 rpm |
In stock
(1x)
|
55,59 € with VAT |
ISO40 x ER16M - 160mm G2.5/25.000 rpm |
In stock
(34x)
|
53,81 € with VAT |
ISO40 x ER20 - 60mm |
In stock
(13x)
|
41,53 € with VAT |
ISO40 x ER20 - 70mm G2.5/25.000 rpm |
In stock
(20x)
|
42,06 € with VAT |
ISO40 x ER25 - 70mm |
In stock
(1x)
|
41,02 € with VAT |
ISO40 x ER25 - 70mm G2.5/20.000 rpm |
In stock
(29x)
|
43,23 € with VAT |
ISO40 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(16x)
|
49,49 € with VAT |
ISO40 x ER25 - 160mm , G2.5 / 25.000 rpm |
In stock
(7x)
|
77,00 € with VAT |
ISO40 x ER32 - 70mm |
In stock
(4x)
|
41,48 € with VAT |
ISO40 x ER32 - 70mm , G2.5/30.000 rpm |
In stock
(5x)
|
41,48 € with VAT |
ISO40 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(5x)
|
54,58 € with VAT |
ISO40 x ER32 - 150mm , G2.5/25.000 rpm |
In stock
(7x)
|
62,61 € with VAT |
ISO40 x ER40 - 70mm |
In stock
(1x)
|
44,14 € with VAT |
ISO40 x ER40 - 70mm , G6.3/15.000rpm |
In stock
(4x)
|
44,87 € with VAT |
ISO40 x ER40 - 100mm |
In stock
(6x)
|
50,76 € with VAT |
ISO40 x ER40 - 150mm |
In stock
(11x)
|
51,53 € with VAT |
ISO40 x ER50 - 80mm |
In stock
(18x)
|
38,85 € with VAT |
ISO40 x ER50 - 100mm , G2.5/25.000 rpm |
In stock
(12x)
|
75,75 € with VAT |
ISO50 x ER25 - 100mm |
On request
|
67,66 € with VAT |
ISO50 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(10x)
|
75,75 € with VAT |
ISO50 x ER32 - 80mm |
On request
|
64,30 € with VAT |
ISO50 x ER32 - 80mm , G2.5/30.000rpm |
In stock
(2x)
|
69,38 € with VAT |
ISO50 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(11x)
|
75,75 € with VAT |
ISO50 x ER32 - 160mm |
In stock
(2x)
|
71,73 € with VAT |
ISO50 x ER32 - 160mm , G2.5/30.000rpm |
In stock
(4x)
|
89,66 € with VAT |
ISO50 x ER40 - 80mm |
In stock
(10x)
|
75,06 € with VAT |
ISO50 x ER40 - 80mm , G2.5/30.000rpm |
In stock
(3x)
|
76,69 € with VAT |
ISO50 x ER40 - 100mm , G2.5/30.000rpm |
On request
|
78,31 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000136074
- Warranty:
- 24 months
- Code:
- DIN69871-40-ER20-070L-25k
Product information
ISO40xER20 (40xER20)
Length from cone to clamp: 70mm
Max. Collar Size: 13mm
Bolt Threaded Bolt / Bolt: M16
For External Collet: 20mm
Diameter Clamping Nut: 30mm Hexagon
Clamping Shank for Car. replacement: DIN
Collet ER20 can be purchased.
Fastening: up to 0,005mm
DIN 69871
Clamping Procedure:
Fasten the clamping nut into the clamping nut - according to the attached picture.
Variants
![](https://www.kovonastrojecz.com/content/images/product/default/2982439.jpg)
![](https://www.kovonastrojecz.com/content/images/product/default/2942846.jpg)
Accessories
-
Precision ER20 collet , DIN6499B / 428E
Clamping collet series: ER 20 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 428E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,79 € with VAT -
Tapping ER20 collet with square drive , DIN6499A
ER 20 / GER 20 / GER20 series collet with internal square for machine taps Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
22,14 € with VAT -
Sealed collet ER20 , DIN6499C / 428EA
Precision clamping sealed collet ER 20 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 428EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 20mm Length: 32mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
15,17 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!