Collet chuck ISO40 x ER16 DIN69871 - 100mm, balanced G2.5 / 25,000rpm.
| ISO30 x ER11M - 63mm |
In stock
(2x)
|
44,93 € with VAT |
| ISO30 x ER16 - 63mm |
On request
|
44,93 € with VAT |
| ISO30 x ER16M - 63mm |
In stock
(3x)
|
44,93 € with VAT |
| ISO30 x ER20 - 60mm |
On request
|
44,93 € with VAT |
| ISO30 x ER25 - 63mm |
In stock
(8x)
|
44,93 € with VAT |
| ISO30 x ER32 - 63mm , G2.5/25.000 rpm |
In stock
(5x)
|
44,93 € with VAT |
| ISO40 x ER11M - 60mm , G2.5/25.000rpm |
In stock
(14x)
|
48,61 € with VAT |
| ISO40 x ER11M - 100mm , G2.5/25.000rpm |
In stock
(11x)
|
44,43 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/20.000 rpm |
On request
|
59,81 € with VAT |
| ISO40 x ER11M - 150mm , G2.5/25.000 rpm |
In stock
(9x)
|
51,58 € with VAT |
| ISO40 x ER16 - 70mm , G2.5/25.000 rpm |
In stock
(18x)
|
43,06 € with VAT |
| ISO40 x ER16M - 70mm , G2.5/25.000 rpm |
In stock
(1x)
|
51,39 € with VAT |
| ISO40 x ER16 - 100mm , G2.5/25.000 rpm |
In stock
(14x)
|
51,39 € with VAT |
| ISO40 x ER16M - 100mm , G2.5/25.000 rpm |
On request
|
51,39 € with VAT |
| ISO40 x ER16 - 160mm , G2.5/30.000 rpm |
On request
|
55,01 € with VAT |
| ISO40 x ER16M - 160mm G2.5/25.000 rpm |
In stock
(34x)
|
53,25 € with VAT |
| ISO40 x ER20 - 60mm |
In stock
(13x)
|
41,10 € with VAT |
| ISO40 x ER20 - 70mm G2.5/25.000 rpm |
In stock
(20x)
|
41,62 € with VAT |
| ISO40 x ER25 - 70mm |
On request
|
40,60 € with VAT |
| ISO40 x ER25 - 70mm G2.5/20.000 rpm |
In stock
(54x)
|
42,79 € with VAT |
| ISO40 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(18x)
|
48,98 € with VAT |
| ISO40 x ER25 - 160mm , G2.5 / 25.000 rpm |
In stock
(7x)
|
76,22 € with VAT |
| ISO40 x ER32 - 70mm |
On request
|
41,06 € with VAT |
| ISO40 x ER32 - 70mm , G2.5/30.000 rpm |
In stock
(99x)
|
41,06 € with VAT |
| ISO40 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(13x)
|
54,01 € with VAT |
| ISO40 x ER32 - 150mm , G2.5/25.000 rpm |
In stock
(7x)
|
61,96 € with VAT |
| ISO40 x ER40 - 70mm |
In stock
(1x)
|
43,68 € with VAT |
| ISO40 x ER40 - 70mm , G6.3/15.000rpm |
In stock
(4x)
|
44,39 € with VAT |
| ISO40 x ER40 - 100mm |
In stock
(6x)
|
50,24 € with VAT |
| ISO40 x ER40 - 150mm |
In stock
(11x)
|
51,00 € with VAT |
| ISO40 x ER50 - 80mm |
In stock
(18x)
|
38,45 € with VAT |
| ISO40 x ER50 - 100mm , G2.5/25.000 rpm |
In stock
(12x)
|
74,97 € with VAT |
| ISO50 x ER25 - 100mm |
On request
|
66,97 € with VAT |
| ISO50 x ER25 - 100mm , G2.5/25.000 rpm |
In stock
(10x)
|
74,97 € with VAT |
| ISO50 x ER32 - 80mm |
On request
|
63,63 € with VAT |
| ISO50 x ER32 - 80mm , G2.5/30.000rpm |
On request
|
68,67 € with VAT |
| ISO50 x ER32 - 100mm , G2.5/25.000 rpm |
In stock
(9x)
|
70,24 € with VAT |
| ISO50 x ER32 - 160mm |
In stock
(2x)
|
70,99 € with VAT |
| ISO50 x ER32 - 160mm , G2.5/30.000rpm |
In stock
(4x)
|
88,73 € with VAT |
| ISO50 x ER40 - 80mm |
In stock
(9x)
|
74,28 € with VAT |
| ISO50 x ER40 - 80mm , G2.5/30.000rpm |
In stock
(3x)
|
72,29 € with VAT |
| ISO50 x ER40 - 100mm , G2.5/30.000rpm |
On request
|
77,51 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000460896
- Warranty:
- 24 months
- Code:
- DIN69871-40-ER16M-100L-25k
Product information
Length from cone to chuck: 100mm
Max. Collar Size: 10mm
Bolt Thread Bolt / Bolt: M16
For Outer Bolts: 16mm
Bolt Nut Diameter: 25mm Hexagonal
Bolt Thread Bolt / replacement: DIN
Collet ER16 can be purchased.
Fastening: up to 0,005mm
DIN 69871
Clamping Procedure:
Fasten the clamping nut into the clamping nut - according to the attached picture.
Variants
Accessories
-
Precision ER16 collet , DIN6499B / 426E
Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.
7,11 € with VAT -
Sealed collet ER16 , DIN6499C / 426EA
Precision clamping sealed collet ER 16 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 426EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 16mm Length: 28mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
15,03 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!