Collet chuck ISO30 x ER25 DIN2080 with a set of 10 collets, L = 63mm

Clamping collet series: ER 25 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 430E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Sealed collet with internal square ER 25 / GER 25 / GER25 series for machine taps with internal cooling Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A + DIN 6499 B, ISO 15488 A + ISO 15488 B Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

ER 25 / GER 25 / GER25 series collet with internal square for machine taps Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamping collet series: ER 25 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 430EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precision clamping sealed collet ER 25 for drills / mills with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 430EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 25mm Length: 34mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

ER 25 UM / T2