Collet chuck ISO30 x ER16 BT - 60mm, balanced G2.5 / 20,000rpm.

Variant:

Choose variant

BT30 x ER16 - 60mm , G2.5/20.000 rpm.	In stock (5x)	42,93 € with VAT
BT30 x ER16 - 60mm , G2.5/25.000 rpm	In stock (7x)	42,93 € with VAT
BT30 x ER16 - 70mm	In stock (6x)	42,74 € with VAT
BT30 x ER20 - 70mm , G2.5/30.000rpm	In stock (6x)	43,02 € with VAT
BT30 x ER25 - 70mm	In stock (23x)	41,30 € with VAT
BT30 x ER32 - 60mm , G2.5/25.000 rpm	In stock (13x)	46,27 € with VAT
BT30 x ER40 - 80mm , G2.5/25.000rpm	In stock (1x)	45,90 € with VAT
BT40 x ER16 - 70mm , G2.5/30.000 rpm	In stock (7x)	36,08 € with VAT
BT40 x ER16M - 100mm , G2.5/30.000 rpm	In stock (5x)	42,59 € with VAT
BT40 x ER20 - 70mm , G2.5/20.000 rpm.	In stock (4x)	42,47 € with VAT
BT40 x ER25 - 60mm , G2.5/20.000 rpm.	In stock (17x)	40,18 € with VAT
BT40 x ER25 - 70mm , G2.5/25.000rpm	In stock (13x)	40,18 € with VAT
BT40 x ER32 - 70mm , G2.5/30.000 rpm.	In stock (19x)	37,58 € with VAT
BT40 x ER32 - 100mm	On request	49,17 € with VAT
BT40 x ER32 - 100mm , G2.5/30.000 rpm	In stock (5x)	49,17 € with VAT
BT40 x ER40 - 70mm , G2.5/30.000 rpm.	In stock (10x)	38,18 € with VAT
BT40 x ER40 - 100mm	In stock (1x)	52,39 € with VAT
BT40 x ER40 - 100mm , G2,5 / 30.000rpm	In stock (5x)	52,39 € with VAT
BT50 x ER32 - 100mm , G2.5/25.000rpm	In stock (19x)	80,69 € with VAT
BT50 x ER32 - 150mm , G2.5/25.000rpm	In stock (20x)	72,29 € with VAT
BT50 x ER40 - 100mm , G2.5/25.000rpm	In stock (20x)	72,29 € with VAT

Current price:

42,93 € with VAT

35,48 € without VAT

In stock (5x)

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:: 1000000280357
Warranty:: 24 months
Code:: BT-30-ER16-060-20k

Product information

Clamping clamp SK ISO 30 ER 16 - 60 mm - balanced for high speed NC machines G2.5 / 20000ot / min.
ISO30xER16 (30xER16)
Length from cone to chuck: 60mm
Max. Collar Size: 10mm
Bolt Thread Bolt / Bolt: M12
For Collet Of Outer Diameter: 16mm
Diameter Clamping Nut: 28mm
Clamping Shank for Car. replacement: BT
Collet ER16 can be purchased.
Bending: up to 0,005mm
Clamping Procedure:
Fasten the clamping nut into the clamping nut - according to the attached picture.