CNGA
-
Replaceable insert CNGA 120408 HRC55, Kovonastroje
Turning insert for hardened steel, replaceable insert, insert CNGA 120408 HRC55 Suitable for holders for CNMG / CNMM inserts. Radius: 0.8mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.
In stock42,62 € with VAT -
Replaceable insert CNGA 120408T IN23, Iscar
VBD CNGA 120408T IN23 Turning Tools - Hardened Steel and Gray Cast Iron Radius 0,8mm Material: Ceramics Coating: uncoated IN23 Series: Black ceramics, suitable for normal machining up to finishing hardened steels and gray cast iron. Application: Cast iron: K05-K15 Hardened steel: H10-H30 Cat. No .: 5700418
On request14,10 € with VAT -
Replaceable insert CNGA 120408T IN420, Iscar
VBD CNX 120408T IN420 Turning Pliers - Made of Heat and Temperate Cast Iron Radius 0.8mm Material: Ceramics Coating: TiN - PVD IN420 Series: Black ceramic with PVD TiN coating, suitable for high speed machining of hardened steels (> 40 HRC) and tempered cast iron. E.g. loading of brake discs or epoxy parts. Application: Cast iron: K05-K10 Hardened steel: H05-H25 Cat. No .: 5700623
In stock17,99 € with VAT -
Replaceable insert CNGA 120408T IS6, Iscar
VBD CNGA 120408T ISB Turning Tips for Cast Iron and Superalloys Radius 0.8mm Material: Ceramic (SiAlON) Coating: Uncoated IS6 Series: SiAlON Ceramics. Suitable for high speed machining of cast iron. Can be used for both dry and emulsion machining, for intermittent cutting. Suitable for machining automotive parts such as drums, brake discs, etc. Can also be used for quick milling roughing of super alloys. Usage: Cast iron: K01-K10 Superslitz: S15-S30 Cat. No .: 5700703
On request24,03 € with VAT -
Replaceable insert CNGA 120408E IS9, Iscar
VBD CNGA 120408E IS9 Turning Pliers - Cast Iron Radius 0,8mm Material: Ceramics Coating: Non-coated IS8 Series : Silicon-nitride, suitable for high speed machining with intermittent cut, suitable for machining nickel alloys, refractory alloys such as Inconel, Was paloy and Rene. Usage: Superslitz: S20-S30 Cat. No .: 5720021
On request27,26 € with VAT -
Replaceable insert CNGA 120408T IN22, Iscar
VBD CNG 120408T IN22 - Hardened Steel and Cast Iron Radius 0,8mm Material: Ceramics Coating: uncoated Series IN22: Black ceramics, suitable for high-speed machining from light roughing to finishing hardened steels and tempered gray cast iron. Application: Cast iron: K15-K30 Hardened steel: H05-H15 Cat. No. 5795183
On request14,10 € with VAT