Classic (middle series)

Angle Hex: 25-30 ° Material: HSS - High-Speed ??Steel DIN338 LN / PN 2914 / ČSN 221131 Usage: General - pillar, column drills Unalloyed and alloy steel, cast steel with strength up to 900 N / mm2 Gray tempered cast iron, ductile iron cast iron, aluminum alloy with short chip, bronze

Angle: Hex: 25-30 ° Material: HSS - High-Speed ??Steel DIN338 LN / PN 2914 / ČSN 221131 Usage: General - pillar, column drills Unalloyed and alloy steel, cast steel with strength up to 900 N / mm2 Gray tempered cast iron, ductile iron cast iron, aluminum alloy with short chip, bronze

Angle: 118 ° Angle Hex: 25-30 ° Material: HSS - High-Speed ??Steel DIN338 LN / PN 2914 / ČSN 221131 Usage: General - pillar, column drills Unalloyed and alloy steel, cast steel with strength up to 900 N / mm2 Gray tempered cast iron, ductile iron cast iron, aluminum alloy with short chip, bronze

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 4.5mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multi-purpose right-hand ground spiral drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: 5.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 11.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Thread Repair Kit M10 (M10x1,25) mm / Thread Repair Gradient: 1,25 - Fine Gradient 1pcs - HSS Grinded Drill & Special Tapper 1pcs Inserts Lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert