Clamps for NC lathes

VDI mandrel for drill chuck VDI size (clamping diameter): according to the selected variant Clamping cone for the chuck: according to the selected variant Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI 3425) Usage: for NC / turret lathes

VDI adjusting mandrel Size (clamping diameter): according to the selected variant Diameter: according to the selected variant Length: according to the selected variant Throwability: up to 0.003mm Other dimensions - see the attached catalog sheet Standard: DIN 69880 / DIN ISO 10889 (VDI) Usage: for NC / turret lathes It is possible to purchase a wooden case for the mandrel, which is suitable for permanent storage.

Removable Shaft Thread Insert TN 16ER190W Size: 16 Creep: 19 Strokes per inch Height (By Cut): 3,47mm Inner Cutting Slices BSW, BSF and G Thread with 19 W Walks per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017751

Set of countersinks with cylindrical shank and guide pin Application - for countersinking screws with recessed head. Guide pin adapted to bolt hole Material: HSS ČSN 22 1605 / CSN 22 1605 This set includes these countersinks (bolt - recess x leading guide pin ): M3 - 5,7x2,5 M4 - 7,8x3,3 M5 - 9,5x4,2 M6 - 11,4x5

Tool holder VDI30x8x60 type E2 for boring knives with internal cooling Size (clamping diameter): 30 mm For VBD drills with a diameter: 8 mm - see attached table for other dimensions Standard: DIN 69880 - E2-30x8 Use: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI30x10x60 type E2 for boring knives with internal cooling Size(clamping diameter): 30 mm For VBD drills o diameter: 10 mm * other dimensions see enclosed table < br> Standard: DIN 69880 - E230x10 Application: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI30x20x60 type E2 for boring knives with internal cooling Size(clamping diameter): 30 mm For VBD drills o diameter: 20 mm * other dimensions see attached table < br> Standard: DIN 69880 - E230x20 Application: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI30x40x85 type E2 for boring knives with internal cooling Size(clamping diameter): 30 mm For VBD drills o diameter: 40 mm * for other dimensions see attached table Standard: DIN 69880 - E230x40 Made: the NC / turret lathes Made in the Czech Republic.

Tool holder VDI40x8x75 type E2 for boring knives with internal cooling Size (clamping diameter) : 40 mm For VBD drills with diameter : 8 mm - for other dimensions see attached table Standard: DIN 69880 - E2-40x8 Use: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI40x10x75 type E2 for boring knives with internal cooling Size (clamping diameter): 40 mm For VBD drills with a diameter of: 10 mm - see attached table for other dimensions Standard: DIN 69880 - E2-40x10 Use: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI40x12x75 type E2 for boring knives with internal cooling Size (clamping diameter) : 40 mm For VBD drills with diameter : 12 mm - for other dimensions see attached table Standard: DIN 69880 - E2-40x12 Use: for NC / turret lathes Made in the Czech Republic.

Tool holder VDI40x16x75 type E2 for boring knives with internal cooling Size(clamping diameter): 40 mm For VBD drills o diameter: 16 mm * for other dimensions see attached table standards - Standard: DIN 69880 - E240x16 - Made in the Czech Republic.