Clamps for milling
-
Collet
-
Weldon
-
For face cutters
-
For thread cutters
-
Cutters for cutters
-
Straight collets
-
Retractable pins for cars. exchange
-
Morse milling mandrel with longitudinal groove CSN 241413, Zbrojovka
Clearance saleMilling mandrel with conical shank for cylindrical end mills, mandrel for holding cutters Clamping Morse cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241413 The goods come from excess stock, unused
from 41,79 € with VAT -
Extended morse milling mandrel with spacer rings
Milling mandrel with pen and spacers / spacer rings Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions: see product description for individual variants * To mount machine saw blades, it is necessary to remove the drive pin.
from 20,42 € with VAT -
Collet for 16mm holder , CSN 241495
Clamping collet for JAL collet clamping head / collet clamp - (smaller) jalky ( fits into the clamping case with ČSN 221490 or 221491 or 221492 ) Inner diameter of the collet: according to the selected variant Outer diameter of collet: 16mm Standard: PN 241495 / 24 1495
from 6,01 € with VAT -
Cylindrical holder for screw cutters with external thread, AKKO
Cylindrical mandrel for clamping milling head / milling cutter with external thread - type AVTT Internal thread for cutter: according to the selected variant Cylindrical clamping shank: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet
from 149,04 € with VAT -
Clamping ER nut for collet holder , type T2 / UM
Nut for heads with collet (collet clamp) Nut size: according to the selected variant Other dimensions - see product description for individual variants Standard: DIN6499 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
from 10,19 € with VAT -
Milling mandrel with cylindrical shank for milling head with transverse driving groove
Milling mandrel for clamping cylindrical socket cutters with a transverse groove Method of clamping the cutter: stones and screw Clamping diameter for cutter: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Other dimensions - see product description for individual variants
from 51,22 € with VAT -
Collet for 28mm holder , CSN 241495
Clamping collet for JAL collet clamping head / collet clamp - larger jaws (fits in clamping case with ČSN 221490 or 221491 or 221492) Inner diameter of the collet: according to the selected variant Outer diameter of collet: 28mm Standard: PN 241495 / 24 1495
from 8,70 € with VAT -
Clamping ER nut for collet holder , type T1 / A
Nut for collet clamp with hexagon Nut size: according to the selected variant Other dimensions: see product description for individual variants Standard: DIN6499 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
from 10,19 € with VAT -
R8 straight milling collet for Bridgeport milling machine
Direct collet for direct clamping of tools with a cylindrical shank, i.e. drills, cutters, countersinks, etc. Diameter for the tool: according to the selected variant Type of collet clamping part: R8 Internal collet thread: 7/16" - 20 UNF
14,10 € with VAT -
Screw with a cross head , CSN 241426
Cross screw to milling mandrel Thread: according to the selected variant Thread length: according to the selected variant Other dimensions - see product description for individual variants Standard: ČSN 241426 / 24 1426 The key for this screw can be found in the related products
from 2,87 € with VAT
