Clamps for milling

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the bearing surface of the socket cutter: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping end mills with longitudinal groove SK40x16-35 Method of clamping the cutter: pen Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Length of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see the attached catalog sheet Standard: DIN 69871-A / PN 247226 Maximum circumferential runout on the clamping surface measured against the clamping shank: 0.005 mm Balance: G6.3 / 15,000 rpm.

Precision clamping sealed collet ER 20 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 428EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 20mm Length: 32mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Internal cooling AD/B (yes / no): depending on the selected variant Other dimensions - see attached photo Standard: DIN 69871, ČSN 247227 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

ER 20 / GER 20 / GER20 series collet with internal square for machine taps Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Milling mandrel for clamping a milling head / milling cutter with an external thread Clamping cone: according to the selected variant Thread size for the cutter: according to the selected variant Length from the collar to the clamping part of the cutter: according to the selected variant Other dimensions: see attached photo Standard: DIN69871 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Clamping collet series: ER 25 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 430E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 25 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 430EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precision clamping sealed collet ER 25 for drills / mills with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 430EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 25mm Length: 34mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 25 with two cooling channels in the middle / at the drilling - for drills and milling cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 430ECC Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 25mm Length: 34mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Precision collet ER 25 with cooling channels - for drills and cutters without internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 430EC Usage : For tools (drills and cutters, countersinks, etc.) without internal cooling Dimensions of the collet: Diameter: 25mm Length: 34mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

ER 25 / GER 25 / GER25 series collet with internal square for machine taps Clamping shank: according to the selected variant Square: according to the selected variant Repetition accuracy: 6 µm Standard: DIN 6499 A, ISO 15488 A Usage : For cutting threads / for clamping taps Suitable for central cooling of taps with internal coolant flow or shower cooling for taps that are not adapted for central cooling. Suitable for Zhp heads - M610 Dimensions of the collet: Diameter: 25mm Length: 34mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.