Clamping tools

Hex Shank Tap Chuck with Groove for Locking in Bit Holder Range: M5-M12 Clamping shank: classic hexagon 6.3mm Thanks to the groove on the shank, the chuck can also be used in the bit adapter with locking.

Tap chuck for cordless drill etc. Range: M5-M12 Clamping shank: dia. 8.8 mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

Joiner's clamp plastic Quick-adjustable design Metal bar for sliding, plastic handles Max. clamping length(extension) is 150mm

Milling Washers, Vices, Milling Washers Set of 24 Pairs 125mm Dimensions of Single Washers: 8 x (11, 16, 21, 26, 31) , 36mm) 10 x (13, 18, 23, 28, 33, 38mm) 12 x (15, 20, 25, 30, 35, 40mm) , 32, 37, 42mm) Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 150 mm Home washers Dimensions: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x26, 8x28, 8x30, 8x32, 8x35, 8x40, 8x45, 8x50 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC

Reduction - Morse insert MK4 / 2 milling cutter(MK 4 - 2) For clamping milling cutter with MK2 taper and M10 female thread Through, without internal thread vitu. Total length: 70mm

Morse insert MK4 / 3 milling (MK 4 - 3) For MK3 cone milling cutter and M12 male thread Through, without internal thread. Overall length: 70mm For clamping of the bushing and tools it is necessary to have in the machine a combined clamping screw with threads M16 / M12

Permanent Neodymium (PrNd) Magnet 175x100 mm Polished Sanding Plate. Suitable for fixing small and thin workpieces Magnet Width: 100mm Length magnet: 150mm Overall Length: 175mm Nominal Clamping Force 140N / br> Minimum thickness of chuck material is 5mm Magnetic field height: 8mm Accessories: Allen key and magnet holder clamps Weight 6.5kg (9.5kg) Usable for EDM applications , immersion in dielectric liquids. Application: under grinder If you need a magnet under the milling machine, we recommend PMM series magnets

Permanent neodymium(PrNd) magnet 250x125 mm Grinding plate with fine poles. Suitable for holding small and thin workpieces A… AfA… â „c magnet length: 125mm Magnet length: 120mm Total length: 250mm Nominal clamping force 140N / cm2 Flatness: 0.005mm / 100mm Half distance —: Brass(P1) 0,5mm, steel(P2) 1,5mm Minimum thickness of clamped material is 5mm Height of magnetic field: 8mm Accessories: Allen keys and magnet clamps Weight 6.5kg(9.5kg) Suitable for EDM applications, immersion in dielectric fluids. Use: under the grinder If you need a magnet under a milling machine, we recommend PMM series magnets

The new ZM blade attachment line offers an innovative clamping eye and, thanks to the neodymium magnet used, more than 60 times the force, against its own weight. Neodymium magnet (PrNd) Suitable for clamping straight metal objects and spindles. Flat products: max. weight 1500 kg, minimum material thickness: 45mm, maximum length 2500mm Complies with the following specifications: EN 292/1, EN 292/2, 98/37 / CE, UNI 7690, 89/392 CEE. Load magnets are delivered in carrying capacity of 100kg, 300kg, 500kg, 600kg, 1000kg and 1500kg with fixed or swinging eye.

Home Intake / clamp / end pin stopwatch tool taper ISO 30 (7:24) for the automatic exchange / pull plug, M12 screw, M12x30 ° MAS BT30 x 30 ° / MAS BT30 x 60 < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peg Angle (Upper): 30 ° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2 : 23mm l3: 18mm a °: 60 ° JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4

Retracting / clamping / end screw of tool shanks with ISO 30 taper ( 7:24 ) for automatic exchange / pulling pin, screw M12, M12x45° MAS BT30 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2: 23mm l3: 18mm a° : 45° Standard: JIS B 6339, MAS403-1982 Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4