Clamping tools
-
Clamps for milling
-
Drill chucks
-
Clamps for classic lathes
-
Clamps for NC lathes
-
Universal chucks and acc.
-
Drill chucks
-
Vices, dividers and tables
-
-
Reduction sleeves
-
Magnet. clamps, demagnetizers
-
Boring heads
-
Clamping accessories
-
Collet chuck W16-ER16-150L with cylindrical shank
ER16 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 16, cylindrical shank with weldon surface Clamping range of ER16 clamp: 1.0 - 10.0mm Diameter of the clamping shank: 16 mm Length of clamping part: 150mm Total length of the clamp: 175mm Diameter of the through hole: 10.4mm Diameter of clamping nut: hexagon 25mm Nut thread: M22x1.5 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER16 collets (outer diameter 16mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.
In stock41,04 € with VAT -
Collet chuck W20-ER11M-50L with cylindrical shank
ER11 collet holder with cylindrical shank 20mm, L=50mm, nut type M Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 20 mm Length of clamping part: 50mm Total length of the clamp: 70mm Diameter of the through hole: 10.6mm Diameter of clamping nut: diameter 16mm Nut thread: M13x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.
In stock29,78 € with VAT -
Collet chuck W20-ER20-100L with cylindrical shank
ER20 collet clamp with cylindrical shank 20mm, L=80mm Collet holder, collet head for NC - ER 20, cylindrical shank with weldon surface Clamping range of ER20 clamp: 1.0 - 13.0mm Diameter of the clamping shank: 20 mm Length of the clamping part: 100mm Total length of the clamp: 137mm Diameter of the through hole: 8.5mm Diameter of clamping nut: hexagon 30mm Nut thread: M25x1.5 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER20 collets (outer diameter 20mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps
In stock44,65 € with VAT -
Collet chuck W32-ER25-100L with cylindrical shank
ER25 collet clamp with cylindrical shank 32mm, L=100mm Collet holder, collet head for NC - ER 25, cylindrical shank with weldon surface Clamping range of ER25 clamp: 1.0 - 16.0mm Diameter of the clamping shank: 32 mm Length of the clamping part: 100mm Total length of the clamp: 132mm Diameter of the through hole: 18.2mm Diameter of clamping nut: 42mm Nut thread: M32x1.5 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER25 collets (outer diameter 25mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps
On request42,65 € with VAT -
Collet chuck W32-ER32-100L with cylindrical shank
Clamping collet, collet head for NC - ER 32, cylindrical shank Clamping shank diameter: 32 mm Clamping length Staples: 100mm Total Clamp Length: 150mm Clamping Nut Diameter: 49mm The nut has 6 wedges( socket wrenches ) For collets with outer diameter 32mm Max. collet size: 20mm Throw: up to 0.005mm Balance: G2.5 / 20,000 rpm ER32 collets can be purchased separately < b> Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage: Clamping drill bits, for other tools with cylindrical shank As a tap without length compensation and reversal - for clamping taps( to M20)
In stock51,52 € with VAT -
Universal magnetic blocks 64x143x71mm, WBM500
Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 143mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM500
On requestPrice - On request -
Universal magnetic blocks 64x178x71mm, WBM700
Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 178mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM700
On requestPrice - On request -
Universal magnetic blocks 87x184x88mm, WBM700
Set of 2 pcs of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 87mm Length: 184mm Height: 88mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM1000
On requestPrice - On request