Clamping tools

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d: 21mm Total length: 120mm Taper: 1:2000 The lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimension of the mandrel is marked on the larger diameter side Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved until it will not be caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.1mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.2mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.3mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.4mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.5mm Total length : 110mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.6mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 21.7mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 23mm Total length : 120mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimension of the mandrel is marked on the larger diameter side Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved until it will not be caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 24mm Total length : 120mm Taper : 1:2000 Lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimension of the mandrel is marked on the larger diameter side Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved until it will not be caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 26.5mm Total length : 130mm Taper : 1:2000 Lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 26.7mm Total length : 130mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground The mandrels are conical The size of the mandrel is marked on the side of the larger diameter The mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved , until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350