Chuck with handle

Drilling head with handle - classic design Clamping range: according to the selected variant Clamping cone: according to the selected variant Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

Drilling head with handle - industrial design Clamping range: according to the selected variant Clamping cone: according to the selected variant Ground jaws, very precise drill clamping Accuracy / throw: up to 0.2mm , robust, high-quality chuck design Clamping pins for these chucks can be found in related products. Standard: ČSN 241320 / CSN 24 1320

Přesná vrtací hlavička s kličkou s přesně broušenými čelistmi - profesionální provedení Upínací rozsah : dle zvolené varianty Upínací kužel : dle zvolené varianty Přesně broušené čelisti do špičky , velmi přesné upnutí vrtáku Ozubení je extra přesné , je taženo za studena. Kužel, klicka a dira na kličku jsou kalené. Přesnost / házivost : do 0,15mm , robustní, velmi kvalitní provedení sklíčidla , (běžná sklíčidla mají přesnost 0,35mm) Použití : Strojní stolní a sloupové vrtačky Upínací trny per tato sklíčidla najdete v souvisejících produktech. Norma : ČSN 241320 / CSN 24 1320

Drilling head with handle - classic design Clamping range: according to the selected variant Clamping thread: according to the selected variant Clamping pins for these chucks can be found in related products. Application: Hand drills with thread clamping (Narex, Dewalt, Makita, Extol and other drills) Standard: ČSN 241320 / CSN 24 1320 If you are changing the chuck, look at the body of the existing chuck, the type of thread should be stamped on the body. If you are unsure, measure the thread diameter and respond.

Handle for drill chuck - for classic chucks marked ČSN241320 - including HEAVY-DUTY series Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant For chucks marked ČSN 241321 - see related products Before ordering the handle, compare the parameters with your used handle or chuck!

Handle for precision drill chuck - marked 0.15mm Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. gear diameter: see description of selected variant Max. gear diameter: according to the selected variant Handles are suitable for chucks - see related products Before ordering the handle, compare the parameters with your used handle or chuck!

Handle for VERTEX drill chuck Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant Before ordering a loop, compare the parameters with your used handle or chuck. We do not guarantee compatibility with old Czech chucks and chucks of brands other than Vertex - each manufacturer uses different types of loops.

Metal drill head type 6H with a handle and ground jaws, up to a drill diameter of 6.5mm Ground jaws For clamping the drill: 0.5-6.5mm, taper JT1 ( it is an American taper Jacobs Taper 1 !!!) Body diameter: 32mm, total head height 40/50mm Handle: type T2 Fits Vertex thread cutters - types K1-1/2 and K1-MT2 Cat. number: 3303-062

Magnetic Base - Metal LI-NOX 1/4 " Hose Nipple Diameter: 10mm (for Hoses with Inner Diameter 9-10mm) Diameter of Stand: 35mm Height of Stand: 33mm Dimensions of cooling systems: 1) 1/4 "system Outer diameter of the article (maximum dimension): 16,5mm Outer Outer Diameter - Throat (Maximum Dimension): 12.5mm 1) 1/2 "System Outer Diameter (Maximum Dimension): 25mm cell diameter - throat (maximum dimension): 21mm

Metal drill head with handle, up to drill diameter 13mm / 13S Cat. No. : 317257 Clamping range : 1.5-13mm Clamping thread : 1/2" x 20 UNF , 20 strokes per inch (corresponds to 12.7mm) Diameter body: 42.8mm Overall height: 59/74mm Standard: ČSN 241320 / CSN 24 1320 Usage: Narex drills and others.If you change the chuck, look at body of the existing chuck where the clamping thread should be indicated.

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. No. : 227152 For clamping a 3-16mm drill, taper B16 Body diameter 50mm, total height 67.5/86.5mm The mandrel is not part of the delivery, we can it can be delivered in the version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320

Metal drill head with a handle with ground jaws, clamps drills up to a diameter of 16 mm Cat. no.: 72800 For clamping a 1.5-13mm drill, taper B16 Body diameter 42.8mm, total height 63/77mm The mandrel is not part of the delivery, we can it can be delivered in the version with MK2, MK3, MK4 Standard: ČSN 241320 / CSN 24 1320