Česká výroba 201x
-
55z gear for threads and feeds for the MN80 lathe
Gear - 55 teeth - for lathe MN-80 for cutting metric, whithwort, modular and diametral pitch(DP) threads. Rolled, material 12 050(C45) Number of teeth in module 1: 55 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm Bronze is also required for this gear for the composition of the two-speed interchangeable gear Â!Wheel coupling B and C(see related products) . In addition, a basic basic gear wheel 30 / 20z(see related products) is required for the functional transmission, which ensures the primary transmission in an assembly with a gear wheel in value 20z. To cut a thread where wheel A contains a value other than 20 teeth, a gear thread with 30 teeth(see related products) is required as a tray for wheel A.
In stock15,28 € with VAT -
Improved vernier of transverse feed to the MN80 lathe
Improved Transverse Nonius Lathe for MN 80 Lathe with Logic Reading on Scale Diameter: 40mm Number of Pieces: 150 Splitting: 0 - 0.5 - 1.0 - 1.5 - 2.0 - 2.5 - 0 Length: 17mm Opening: 10H7 Radius Diameter: 43mm As with the original nonius: < Bad Logic Countdown, 0.1mm Cutting. 30pcs on pitch 1.5mm, ie. when moving one piece with a value of 0.05, the 0.1mm offset with an illogical reading on a scale equal to the pitch of the bolt in the case of a lateral displacement. The longitudinal movement of the blade holder is then correct. This improved nonius: 150 pieces with a logical reading on a scale indicating the material pick on the diameter and one piece with a value of 0.01mm have a 0.02mm clearance on the total diameter workpiece! For replacement, just remove the loop, swing the spring plate. Moreover, the nonius is about 5mm longer so it is clearer. This nonius can also be used for various preparations or anything else related to reading.
In stock61,14 € with VAT
