Česká, německá nebo polská výroba

Circular thread die Thread type: Whitworth - BSW (British Standart Whitworth) Climb: in numbers of strokes per inch; BSW - basic climb (rough) Top angle: 55 ° Material: CS - Carbon tool Steel Standard: DIN223, DIN EN22568, replacement PN 8/3211 * Average conversion: 1 "= 25.4mm * Conversion of pitch to millimeters: we do not recommend, it pays to buy thread gauges From excess stock (brands ZONA, SIGMA, ŠKODA, etc.) from the company's dispensary Unused or only slightly used.

Threaded eye with jaw / threaded eye with jaws Size W 3/32" Pitch : 48 z/1" Outer diameter : 20mm Whitworth thread - BSW (British Standar Whitworth) Standard: PN 8/3211 , ČSN 223211 / CSN 22 3211 Material: NO - Tool Steel From above-standard stocks ( stamp. ZONA, SIGMA, ŠKODA, etc.) Unused or only slightly used.

Hand tap W 1/2 ", the first of the set Climbing: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", the other from the set Gliding: 12 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", third from set Gap: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 3/8 ", the first of the set Gap: 16 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.