CASTROL

Product count: 18
  • Emulsifying oil CASTROL Alusol ABF 10, 0.5 liter

    Emulsifying oil CASTROL Alusol ABF 10, 0.5 liter

    Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Home Suitable for machining - soutružení, milling, grinding, drilling, tapping Packing Quantity: 0.5 liters (plastic container with cap) does not contain ingredients that release formaldehyde. and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. Dilution ratio is 4-10% (diluted to 5l to 12.5l mix) depending on the type of operation and material. Application: Aluminum Alloy *** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel ** Non-ferrous Metal ** < br> Grinding (4-5% concentration) *** Milling, turni

    On request
    10,09 € with VAT
  • Emulsifying oil CASTROL Alusol ABF 10, 1 liter

    Emulsifying oil CASTROL Alusol ABF 10, 1 liter

    Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting Packing Quantity: 1 Liter (Plastic Container with Cap) in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 10l to 25l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) *** Milling, turning (5-7% concentration) *** Drilling (5-7% ) ***

    On request
    19,02 € with VAT
  • Emulsifying oil CASTROL Alusol ABF 10, 5 liters

    Emulsifying oil CASTROL Alusol ABF 10, 5 liters

    Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Suitable for Machining - Concentration, Milling, Grinding, Drilling, Thread Cutting Pack quantity: 5 liters (Plastic Container with Cap) Does not contain formaldehyde-releasing additives in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 50l to 125l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) ***

    On request
    87,73 € with VAT
  • Emulsifying oil CASTROL Alusol ABF 10, 10 liters

    Emulsifying oil CASTROL Alusol ABF 10, 10 liters

    Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting - in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 100l to 250l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) *** Milling, turning (5-7% concentration) *** Drilling (5-7% ) *** Reaming (6-9% concentration) *** Sinking (conc

    On request
    166,82 € with VAT
  • Emulsifying oil CASTROL Alusol SL 51 XBB, 0.5 liter

    Emulsifying oil CASTROL Alusol SL 51 XBB, 0.5 liter

    Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Suitable for Machining - Concentration, Milling, Grinding, Drilling, Thread Cutting Package quantity: 0.5 liter (plastic container with cap) No additives available release formaldehyde and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 8.5l to 12.5l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) *

    On request
    6,66 € with VAT
  • Emulsifying oil CASTROL Alusol SL 51 XBB, 1 liter

    Emulsifying oil CASTROL Alusol SL 51 XBB, 1 liter

    Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting Contains formaldehyde-free additives , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 16.7l to 25l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) **

    On request
    11,91 € with VAT
  • Emulsifying oil CASTROL Alusol SL 51 XBB, 5 liters

    Emulsifying oil CASTROL Alusol SL 51 XBB, 5 liters

    Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Home Suitable for machining - soutružení, milling, grinding, drilling, tapping Units: 5 liters (plastic container with cap) does not contain ingredients that release formaldehyde , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 83.5l to 100l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling

    On request
    55,48 € with VAT
  • Emulsifying oil CASTROL Alusol SL 51 XBB, 10 liters

    Emulsifying oil CASTROL Alusol SL 51 XBB, 10 liters

    Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting - , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 167l to 200l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) ** Reaming (8-10% concentration

    On request
    110,24 € with VAT
  • CASTROL Alusol SL 51 XBB, 208 liters - drum

    CASTROL Alusol SL 51 XBB, 208 liters - drum

    Castrol Alusol SL 51 XBB is a water-dilutable semi-synthetic metalworking fluid. Ratio weight / volume: approx. 1:1 Specially designed for machining aluminum alloys(--), possibly also for low, medium (- -) ??to highly alloyed stainless steel(-), non-ferrous metals(-) and cast iron(-). Suitable for machining - turning, milling, grinding, drilling, threading Quantity in package: 208l drum Does not contain additives that release formaldehyde and is therefore compliant with health and safety regulations. Does not contain boron, which means that it complies with environmental protection requirements. Without nitrite and chlorine levels, which means it meets the requirements of local waste treatment legislation and environmental protection requirements. Resistant to mold and bacteria, extending the life of the fluid and reducing maintenance costs. Resistant to fungal attack, extends fluid life and reduces downtime and maintenance requirements. Minimum foaming in recommended water hardness. Excellent wetting and cleaning properties allow the storage of the working fluid. Good anti-corrosion properties provide a high level of protection against corrosion from machinery, tools and products. It covers a wide range of machining, which helps to reduce costs. Suitable for soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water with constant stirring. The dilution ratio is 6-10% ( diluted to 16.7l to 25l of mixture ) depending on the type of operation and material. Usage: Aluminum alloys -- Low and medium alloy steel -- High alloy stainless steel - Non-ferrous metals - Cast iron - Grindin

    In stock
    2.022,04 € with VAT
  • Emulsifying liquid CASTROL Hysol T15, 0.5 liter

    Emulsifying liquid CASTROL Hysol T15, 0.5 liter

    Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 0,5litr = 0,5kg Recommended concentrations: Gray iron grinding: 3-4 % (3% = 33.3l of mixture, 4% = 24l of mixture) Bore: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Cutting: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Milling: 5% (5% = 19l of mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mix) against biological attack by both bacteria and fungi, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

    In stock
    5,43 € with VAT
  • Emulsifying liquid CASTROL Hysol T15, 1 liter

    Emulsifying liquid CASTROL Hysol T15, 1 liter

    Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 1 l = 1 kg - plastic container with cap Recommended concentration: Home grinding cast iron: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19 l mixture) Home Turning: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Home Cutting: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

    In stock
    9,67 € with VAT
  • Emulsifying liquid CASTROL Hysol T15, 5 liters

    Emulsifying liquid CASTROL Hysol T15, 5 liters

    Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 5litres = 5kg Recommended grinding: Gray iron grinding: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19l mixture) Cutting: 4-5% (4% = 24l mixture, 5% = 19l mixture) Cutting: 4-5% Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

    In stock
    43,54 € with VAT