Carbide slotting insert for slotting holder 6 C11, INHM-06-C11
3 C11 |
On request
|
47,57 € with VAT |
4 C11 |
On request
|
47,57 € with VAT |
5 C11 |
On request
|
47,57 € with VAT |
6 C11 |
On request
|
56,64 € with VAT |
8 C11 |
On request
|
56,64 € with VAT |
12 C11 |
In stock
(2x)
|
69,85 € with VAT |
14 C11 |
On request
|
246,02 € with VAT |
16 C11 |
On request
|
246,02 € with VAT |
18 C11 |
On request
|
270,42 € with VAT |
20 C11 |
On request
|
270,42 € with VAT |
22 C11 |
On request
|
270,42 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000470734
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-INHM-06-C11
Product information
Insert width: 6mm
Edge tolerance: C11(6,145mm)
Other dimensions - see enclosed catalog sheet
Material: TK / SK / VHM - carbide
Coating: PVD, TiCN
The insert can be reground 2-3 times.
Holders for this insert can be found in related products.
Variants
Accessories
-
Slotting groove holder for inserts 6mm, UT-06-25L
Slotting knife / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Depth of cut: 81mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,33 € with VAT -
Slotting groove holder for inserts 6mm, UT-06-25
Slotting cutter / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Cutting depth: 56mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,33 € with VAT -
Slotting groove holder for 6mm inserts, UT-06-32
Slotting cutter / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Cutting depth: 56mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,33 € with VAT -
Slotting groove holder for inserts 6mm, UT-06-32L
Slotting cutter / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Cutting depth: 81mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request220,95 € with VAT -
Slotting groove holder for 6 and 8mm inserts, UTSZ-06/08
Slotting knife / holder for slotting machines For slotting width / insert sizes: 6mm and 8mm Knife profile: 15.5 x 12.0mm Minimum hole diameter : 17,9mm / 18,4mm Depth of cut: limited by the total length of the holder / machine Total length of the holder: 220mm Other dimensions - see the enclosed catalog sheet. The holder is made of heat treated hardened steel. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock159,26 € with VAT
Alternatives
-
Grooving insert for slotting holder 6 C11, IN-06-C11
Slotting grooving insert for UT holders Insert width: 6mm Edge tolerance: C11(6,145mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock54,28 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!