Carbide slotting insert for slotting holder 16 H7, INHM-16-H7
3 H7 |
On request
|
47,57 € with VAT |
4 H7 |
In stock
(2x)
|
47,57 € with VAT |
5 H7 |
On request
|
47,57 € with VAT |
6 H7 |
On request
|
56,64 € with VAT |
8 H7 |
On request
|
56,64 € with VAT |
10 H7 |
In stock
(1x)
|
69,85 € with VAT |
12 H7 |
On request
|
69,85 € with VAT |
14 H7 |
On request
|
246,02 € with VAT |
16 H7 |
On request
|
246,02 € with VAT |
18 H7 |
On request
|
270,42 € with VAT |
20 H7 |
On request
|
270,42 € with VAT |
22 H7 |
On request
|
270,42 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000470901
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-INHM-16-H7
Product information
Insert width: 16mm
Edge tolerance: H7(16,018mm)
Other dimensions - see enclosed catalog sheet
Material: TK / SK / VHM - carbide
Coating: PVD, TiCN
The insert can be reground 2-3 times.
Holders for this insert can be found in related products.
Variants
Accessories
-
Slotting groove holder for 14 and 16 mm inserts, UTSZ-14/16
Shaping grooving knife / holder for shaping machines For a groove with a width / plate size: 14mm and 16mm Knife profile: 35.0 x 30.0mm Minimum hole diameter: 43.0mm / 44.0mm Image depth: limited by the total length of the holder / machine Total length of the holder: 350mm Other dimensions - see the attached catalog sheet. The holder is made of heat treated hardened steel. The holder is supplied without an insert, these are purchased separately - you can find them in the related products or in the attached catalog sheet. We can only offer carbide inserts for this holder size.
In stock301,48 € with VAT -
Slotting groove holder for 14 and 16 mm inserts, UT-14 / 16-25
Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 126mm Shank diameter: 25mm Shank length: 90mm Other dimensions - see enclosed data sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock240,12 € with VAT -
Slotting groove holder for 14 and 16mm inserts, UT-14 / 16-32L
Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 180mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request240,12 € with VAT -
Slotting groove holder for 14 and 16mm inserts, UT-14 / 16-25L
Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 180mm Shank diameter: 25mm Shank length: 90mm Other dimensions - see enclosed data sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request240,12 € with VAT -
Slotting groove holder for 14 and 16mm inserts, UT-14 / 16-32
Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 126mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed data sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock245,92 € with VAT
Alternatives
-
Grooving insert for slotting holder 16 H7 with chamfer, IN-16-H7-SM
Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 16mm Edge tolerance: H7(16,018mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN Chamfering of the cutting edge helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface . The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.
In stock78,99 € with VAT -
Grooving insert for slotting holder 16 H7, IN-16-H7
Slotting grooving insert for UT holders Insert width: 16mm Edge tolerance: H7(16,018mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock78,99 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!