Carbide slotting insert for slotting holder 12 H7, INHM-12-H7
| 3 H7 |
On request
|
47,57 € with VAT |
| 4 H7 |
In stock
(2x)
|
47,57 € with VAT |
| 5 H7 |
On request
|
47,57 € with VAT |
| 6 H7 |
On request
|
56,64 € with VAT |
| 8 H7 |
On request
|
56,64 € with VAT |
| 10 H7 |
In stock
(1x)
|
69,85 € with VAT |
| 12 H7 |
On request
|
69,85 € with VAT |
| 14 H7 |
On request
|
246,02 € with VAT |
| 16 H7 |
On request
|
246,02 € with VAT |
| 18 H7 |
On request
|
270,42 € with VAT |
| 20 H7 |
On request
|
270,42 € with VAT |
| 22 H7 |
On request
|
270,42 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000470840
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-INHM-12-H7
Product information
Insert width: 12mm
Edge tolerance: H7(12,018mm)
Other dimensions - see enclosed catalog sheet
Material: TK / SK / VHM - carbide
Coating: PVD, TiCN
The plate can be reground 2-3 times.
Holders for this insert can be found in related products.
Variants
Accessories
-
Slotting groove holder for inserts 12mm, UT-12-32
Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 104mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request240,12 € with VAT -
Slotting groove holder for inserts 12mm, UT-12-32L
Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 161mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request240,12 € with VAT -
Slotting groove holder for inserts 12mm, UT-12-25
Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 104mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request240,12 € with VAT -
Slotting groove holder for inserts 12mm, UT-12-25L
Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 161mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock240,12 € with VAT -
Slotting groove holder for inserts 10 and 12mm, UTSZ-10/12
Slotting knife / holder for slotting machines For slotting width / insert sizes: 10mm and 12mm Knife profile: 20.6 x 14.0mm Minimum hole diameter : 23,8mm / 24,2mm Depth of cut: limited by the total length of the holder / machine Total length of the holder: 250mm Other dimensions - see the enclosed catalog sheet. The holder is made of heat treated hardened steel. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request187,84 € with VAT
Alternatives
-
Grooving insert for slotting holder 12 H7, IN-12-H7
Slotting grooving insert for UT holders Insert width: 12mm Edge tolerance: H7(12,018mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
In stock67,55 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!