Carbide roughing cutter 4 pcs. 30° AlTiN up to 55 HRC, CHIPMILL55-NR
Recommended ✓
Variant:
| 3,0x8x50 mm |
In stock
(9x)
|
19,84 € with VAT |
| 4,0x10x50 mm |
In stock
(8x)
|
20,01 € with VAT |
| 6,0x15x60 mm |
In stock
(3x)
|
25,70 € with VAT |
| 8,0x20x60 mm |
In stock
(6x)
|
33,98 € with VAT |
| 10,0x25x75 mm |
In stock
(4x)
|
49,34 € with VAT |
| 12,0x30x75 mm |
In stock
(3x)
|
68,50 € with VAT |
| 16,0x40x100 mm |
In stock
(4x)
|
97,04 € with VAT |
| 20,0x50x100 mm |
In stock
(4x)
|
124,18 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Warranty:
- 24 months
Product information
Carbide roughing ( TK ) milling cutter with interrupted edge
Number of blades: 4 blades.
Diameter of the working part: according to the selected variant
Length of the working part: according to the selected variant
Total length: according to the selected variant
Screw: 30°
Clamping shank: see attached catalog sheet
Carbide : super fine grain carbide
Coating: PVD ( AlTiN )
Tolerance of the cutting edge diameter:
-0.015mm for cutters up to 5mm in diameter (included)
-0.020mm for cutters from diameter 6mm (included)
Usage :
Type NR - Roughing milling with the resulting machining Ra 12.5 and rougher, the cutter has 2 cutting edges through the middle.
Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 55 HRC
Suitable also for thermal and hydro clamping
Cutting conditions - see attached photo
Number of blades: 4 blades.
Diameter of the working part: according to the selected variant
Length of the working part: according to the selected variant
Total length: according to the selected variant
Screw: 30°
Clamping shank: see attached catalog sheet
Carbide : super fine grain carbide
Coating: PVD ( AlTiN )
Tolerance of the cutting edge diameter:
-0.015mm for cutters up to 5mm in diameter (included)
-0.020mm for cutters from diameter 6mm (included)
Usage :
Type NR - Roughing milling with the resulting machining Ra 12.5 and rougher, the cutter has 2 cutting edges through the middle.
Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 55 HRC
Suitable also for thermal and hydro clamping
Cutting conditions - see attached photo
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!