Carbide end mills

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 12mm, tolerance h10 Length of working part: 28,0mm Total length: 83mm Screw : 45Â ° Clamping shank: 12mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 3mm, tolerance h10 Length of working part: 9,0mm Total length: 38mm Screw : 45Â ° Clamping shank: 3mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 5mm, tolerance h10 Length of working part: 13,0mm Total length: 50mm Screw : 45Â ° Clamping shank: 5mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide( TK) corner milling cutters for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steels Number of pieces : 3bA ™. Diameter of working part: 6mm, tolerance h10 Length of working part: 15,0mm Total length: 57mm Screw : 45Â ° Clamping shank: 6mm, tolerance h6,( weldon flat for application) Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the milling cutter should run through center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of working part: 3mm Length of working part: 9.0mm Total length: 75mm Screw: 55° Clamp shank: 4mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

K10 Clamping diameter: 3,175 mm Overall length: 120 mm Size of tip / tip (T): 3,0 mm Angle of tip (A): 30 st Suitable for ABS, PVC, AKRYL, PLAST

Diameter 6 mm Cutting length 52mm Overall length 80mm Clamping diameter 6mm Suitable for acrylic, wood, aluminum, brass, steel.

Diameter 6 mm Cutter length 72mm Overall length 100mm Clamping diameter 6mm Suitable for acrylic, wood, aluminum, brass, steel.

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 14mm Length of the working part: 35.0mm Total length: 100mm Screw: 35° Clamping shank: 14mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 1.5mm Length of the working part: 4.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of working part: 2mm Length of working part: 6.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 2.5mm Length of the working part: 7.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo