Carbide drills
-
Carbide drill 3xD TiAlN 118 ° DIN6539 / DIN1897, CERANIT
Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 3D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)
from 4,80 € with VAT -
Carbide drill 8xD TiAlN 118 ° DIN6539 / DIN1897, CERANIT
Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 8D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)
from 5,06 € with VAT -
Carbide drill 3xD TiAlN 140 ° DIN6539, TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 21,11 € with VAT -
Carbide drill 3xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine grain K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 0,99 € with VAT -
Carbide drill 3xD AlTiN 140 ° DIN6537 K, ZPS
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S30112
from 13,50 € with VAT -
Carbide drill 5xD TiAlN 140 ° DIN6539, TRITON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 10,97 € with VAT -
Carbide drill 5xD TiAlN 140 ° DIN6539, internal cooling , TRITON
Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 8,36 € with VAT -
Carbide micro drill 5xD TiAlN 130 °, MICRON
Carbide drill TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 130 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: production standard Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC
from 8,93 € with VAT -
SK drill bit 5xD AlTiN 140° DIN6537 K, internal cooling , ZPS - resale
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 5D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S10122
from 45,40 € with VAT -
Carbide drill 5xD ZrN 140° type W DIN6535HA, I.C. , ZPS
Carbide drill SK / TK / HA / PVD for aluminum, non-ferrous metals and plastics Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 5D Other dimensions - see the attached catalog sheet Diameters that you only found in the catalog sheet are made to order. Tip angle: 140° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining Al alloys with a lower Si content, or machining of plastics and copper. Standard: DIN6535 HA (smooth shank) Usage : Aluminum, Al-alloys, copper, brass, bronze, plastics and other non-ferrous metals Aluminium, Al-Si alloys (Si < 6%) up to 400 MPa Al-Si alloys (Si < 12%) up to 600 MPa Aluminum alloys ( Si > 12% ) up to 600 MPa Copper, copper alloys, brass and bronze up to 800 MPa Plastics up to 300 MPa Cat. No. - series: S10132 ZrN
from 15,66 € with VAT -
SK drill bit 5xD AlTiN 140° DIN6537 K, internal cooling , ZPS
Carbide drill SK / TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Catalog number: S10222
from 49,71 € with VAT -
Carbide drill 8xD AlTiN 135 ° DIN6537 K, internal cooling , ZPS
Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 135 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Catalog number: S20122
10,41 € with VAT
