Candle thread repair

V-Coil Thread Repair Kit M14x1,25 mm / Thread Repair Gradient: 1,25 - Fine Gradient Set includes: special stepped tap, loader and 15x threaded insert. Inserts are included in the set in total of 3 lengths, each length of 5 pieces. Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M10x1.0 Thread Repair Kit / Stern Thread Repair Gradient: 1.0 - Fine Gradient stacked candles. 1pcs - ) 5pcs - threaded inserts of 2.0D (after insertion into a thread about 20mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M12x1,25 mm Thread Repair Kit / Socket Thread Repair Gradient: 1,25 - Fine Grip stacked candles. 1pcs - ) 5pcs - threaded inserts in 2,0D (after insertion into a thread about 24mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

M14 Thread Repair Kit (M14x1,25) mm / Socket Thread Repair Grip: 1,25 - Fine Grip Set contains: 1pcs - Special Stage Tap - Works as well drill bits 1pcs 5pcs length liners are each a multiple of the diameter of the repair of the thread, i.e. e.g. if correcting M6 thread and the set of the inserts 1.5D, then the length of the insert of 1.5 6 mm, 9 mm, therefore. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert