Brusná rouna

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as a preparation for gluing, removing blue discoloration after welding. Diameter: 125mm Grain size: coarse - this wheel is suitable for use after grinding abrasives of grain size P60 - P120 Corundum: A Optimum working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm Open material structure gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: fine - this wheel is suitable for use after grinding abrasive grit P180 - P320 Corundum: A Optimal working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material imparts elasticity to the tools and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: medium - this wheel is suitable for use after grinding abrasives with a grain size of P120 - P180 Corundum: A Optimal working speed Height: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive fleece green, marked K120 width 115m, length 1 meter This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive fleece red, marked K180 Width 115m, length 1 meter This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive fleece gray marking K320 width 115m, length 1 meter This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive fleece green, coarse Sheet measuring 125x230mm This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive fleece gray, fine Arch measuring 125x230mm This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive steel wool Weight 100g Roughness: rough Suitable for sanding wood, metal and paint

Abrasive steel wool Weight 100g Roughness: fine Suitable for sanding wood, metal and paint

Abrasive steel wool Weight 100g Roughness: medium roughness Suitable for sanding wood, metal and paint

Abrasive fleece - abrasive fleece - scotch-brite (3M) with Velcro fastening 150mm diameter Schotch Brite SC-DH 1064296