Obrážecí hlavy

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping cylindrical shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping conical morse shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank - steep taper ISO, DIN69871: size according to selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping shank VDI: size according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-10mm 4-edge: 1-8mm TORX: T3-T40 TORX PLUS: IP6-IP40 For broaches type: G8(with 8mm shank) Head diameter: 35mm Head length(without driver): 46mm Clamping shank: 20mm, with with a flat surface for a weldon clamp Other dimensions - see the attached catalog sheet This head is without a securing shaft - securing is not necessary for the broaching of small short profiles. Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400 MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-8mm 4-edge: 1-6mm TORX: T3-T40 TORX PLUS: IP6-IP40 For broaches type: G8(with 8mm shank) Head diameter: 37mm Head length(without driver): 36mm Clamping shank: 20mm (cylindrical ) Other dimensions - see the attached catalog sheet This head is without a locking shaft - locking is not necessary for broaching small short profiles. Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400 MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-15mm 4-edge: 1-12mm TORX: T3-T60 TORX PLUS: IP6-IP60 For broaches type: G12 ( with 12mm shank) Head diameter: 58mm Head length (without driver): 77mm Clamping shank: 25mm Other dimensions - see attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a max. strength of up to 1400MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-15mm 4-edge: 1-12mm TORX: T3-T60 TORX PLUS: IP6-IP60 For broaches type: G12 ( with 12mm shank) Head diameter: 58mm Head length (without driver): 77mm Clamping shank: 32mm Other dimensions - see attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a max. strength of up to 1400MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 25mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 32mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 40mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.