Broaching head BR-G12A-C-22 for broaching square holes
| G5 , 8 mm |
On request
|
463,60 € with VAT |
| G5 , 10 mm |
On request
|
463,60 € with VAT |
| G5 , 12 mm |
On request
|
463,60 € with VAT |
| G5 , 15,875 mm |
On request
|
463,60 € with VAT |
| G5 , 16 mm |
On request
|
463,60 € with VAT |
| G5 , 19,05 mm |
On request
|
463,60 € with VAT |
| G5 , 20 mm |
On request
|
463,60 € with VAT |
| G5 , 22 mm |
On request
|
463,60 € with VAT |
| G8 , 10 mm |
On request
|
646,81 € with VAT |
| G8 , 12 mm |
On request
|
646,81 € with VAT |
| G8 , 16 mm |
On request
|
646,81 € with VAT |
| G8 , 19,05 mm |
On request
|
646,81 € with VAT |
| G8 , 22 mm |
On request
|
646,81 € with VAT |
| G8 , 25 mm |
On request
|
646,81 € with VAT |
| G8 , 25,4 mm |
On request
|
646,81 € with VAT |
| G8M , 10 mm |
On request
|
611,26 € with VAT |
| G8M , 12 mm |
On request
|
578,62 € with VAT |
| G8M , 16 mm |
On request
|
611,26 € with VAT |
| G8M , 19,05 mm |
On request
|
611,26 € with VAT |
| G8M , 20 mm |
On request
|
611,26 € with VAT |
| G8M , 22 mm |
On request
|
611,26 € with VAT |
| G8M , 25 mm |
On request
|
611,26 € with VAT |
| G8M , 25,4 mm |
On request
|
611,26 € with VAT |
| G8S , 10 mm |
On request
|
566,34 € with VAT |
| G8S , 12 mm |
On request
|
566,34 € with VAT |
| G8S , 15,875 mm |
On request
|
566,34 € with VAT |
| G8S , 16 mm |
On request
|
566,34 € with VAT |
| G8S , 19,05 mm |
On request
|
566,34 € with VAT |
| G8S , 22 mm |
On request
|
566,34 € with VAT |
| G8S , 25 mm |
On request
|
566,34 € with VAT |
| G8S , 25,4 mm |
On request
|
566,34 € with VAT |
| G12B , 16 mm |
On request
|
693,78 € with VAT |
| G12B , 19,05 mm |
On request
|
693,78 € with VAT |
| G12B , 20 mm |
On request
|
693,78 € with VAT |
| G12B , 22 mm |
On request
|
693,78 € with VAT |
| G12B , 25 mm |
On request
|
693,78 € with VAT |
| G12B , 25,4 mm |
On request
|
693,78 € with VAT |
| G12A , 19,05 mm |
On request
|
1.263,57 € with VAT |
| G12A , 20 mm |
On request
|
1.263,57 € with VAT |
| G12A , 22 mm |
On request
|
1.263,57 € with VAT |
| G12A , 25 mm |
On request
|
1.263,57 € with VAT |
| G12A , 25,4 mm |
On request
|
1.263,57 € with VAT |
| G12A , 32 mm |
On request
|
1.263,57 € with VAT |
| G16 , 25 mm |
In stock
(1x)
|
1.085,71 € with VAT |
| G16 , 32 mm |
In stock
(1x)
|
1.085,71 € with VAT |
| G16L , 25 mm |
On request
|
1.455,30 € with VAT |
| G16L , 32 mm |
On request
|
1.455,30 € with VAT |
| G16L , 32 mm , I.C. |
In stock
(1x)
|
1.580,10 € with VAT |
| G16L , 25 mm , I.C. |
In stock
(1x)
|
1.540,31 € with VAT |
| G16L , 40 mm , I.C. |
On request
|
1.580,10 € with VAT |
| G16L , 40 mm |
On request
|
1.455,30 € with VAT |
| G25 , 32 mm |
On request
|
2.496,68 € with VAT |
| G25 , 40 mm |
On request
|
2.496,68 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000005366315
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-BR-G12A-C-22
Product information
Scope of use :
6-edge: 1-15mm
4-edge: 1-12mm
TORX: T3-T60
TORX PLUS: IP6-IP60
For broaches type: G12 and G12A (with 12mm shank)
Long broaches G12A and G12AK cannot be clamped in the head - the display will not work correctly!
Head diameter: 58mm
Head length (without driver): 77mm
Clamping shank: 22mm
Other dimensions - see the attached catalog sheet
Usage (see attached video) :
Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center
For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa
The head works on the principle of broaching/extrusion - see the attached video.
For the head, it is necessary to purchase broaching extensions (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements.
Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.
Variants
Accessories
-
Long hexagonal slotting adapter HSS/HSSE-PM
Long imaging attachment - hexagonal punch Size of attachment / for imaging heads: according to the selected variant Hexagon size: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These long imaging extensions can only be clamped and imaged correctly in an adjustable imaging head type G12A. With the ordinary G12 head, it is not possible to adjust the imaging depth, and the attachment or the imaging head may be damaged. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 115,93 € with VAT -
Long square slotting adapter HSS/HSSE-PM
Long image attachment - square punch Size of attachment / for imaging heads: according to the selected variant Size of the square: according to the selected variant Dimension tolerance and imaging depth - see attached PDF catalog sheet. These long imaging extensions can only be clamped and imaged correctly in an adjustable imaging head type G12A. With the ordinary G12 head, it is not possible to adjust the imaging depth, and the attachment or the imaging head may be damaged. Material: HSS or HSSE-PM - according to the chosen variant Coating: without coating * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS, or other coatings, and we can also supply these attachments with internal cooling Usage - see attached video Uncoated design of the extension: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the extension: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend HSSE-PM sintered steel punches for serial production and when forming steels with higher strength + stainless steel. The attachments with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the punch! If you need a different punch size or tolerance, or if you did not find the desired punch in the menu, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 115,93 € with VAT -
Torx slotting adapter HSS/HSSE-PM
Forming attachment - torx punch Attachment size / for shaping heads: according to the chosen variant Torx size: according to the chosen variant Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa For series production and for stamping steels with higher strength + stainless steel, we recommend punches made of sintered steel HSSE-PM. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.
from 83,32 € with VAT -
Broach 1mm square HSS, G12-Q-1
Broaching adapter - square broach - 4-edge Dimension: 1 - square 1mm Dimension tolerance and depth of image - see attached PDF catalog sheet. For broaching heads: BR-G12 Clamping shank: 12mm Material: HSS - high-speed steel Coating: no coating - we are able to offer coating TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings - with max. strength up to 900MPa Coated version of the attachment: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa In serial production and when forming steels with a higher strength than stainless steel, we recommend HSSE-PM sintered steel broaches. The broaching adapters with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the broach! If you need a different broach size or tolerance, or if you did not find the required broach in the menu, send us an inquiry. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.
On request63,46 € with VAT -
Broach 1mm hexagon HSS, G12-E-1
Broaching adapter - hexagonal broach Dimension: HEX 1 - hexagon 1mm Dimension tolerance and image depth - see attached PDF catalog sheet. For broaching heads: BR-G12 Clamping shank: 12mm Material: HSS - high-speed steel Coating: no coating - we are able to offer coating TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings - with max. strength up to 900MPa Coated version of the attachment: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa In serial production and when forming steels with a higher strength than stainless steel, we recommend HSSE-PM sintered steel broaches. The broaching adapters with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the broach! If you need a different broach size or tolerance, or if you did not find the required broach in the menu, send us an inquiry. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.
On request63,46 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!