APKT

Milling insert for hardened steel, replaceable insert, insert APGW 160408 HRC55 Suitable for holders for APKT 1604 or APMT 1604 inserts Radius: 0.8mm Material: CBN(1x) CBN coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

VBD APKT 1003 PDR - HM IC20 IC20 Series: Suitable for routine and finishing operations, roughing aluminum, cast iron and stainless steel. Plates are especially recommended for machining non-ferrous metals - aluminum, copper, brass, plastics, etc., or cutting / sharpening / casting to reduce the chip and the feed to a minimum. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo HM Type: General use Cat. : 5600047

Cutter insert, replaceable for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC928 series: Tough sub-micron substrate with TiAlN PVD coating. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. Ideal for roughing operations and intermittent cuts. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No. 5602364

Milling insert, replaceable for milling VBD Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC928 Series: Flammable sub-micron substrates with TiAlN PVD coating. Developed for machining heat-resistant alloys, austenitic stainless steels and very hard steels. Ideal for roughing operations and intermittent cutting. Steel: P20-P40 Stainless steel: M25-M35 Cast iron: K15-K40 Superalloys: S15-S30 Stainless steel conditions - see attached photo Cat. Ä. : 05602963 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Indexable insert for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, AlTiN TiN IC830 Series: < Suitable for intermittent cut and roughing operations of stainless steels, refractory steels and alloyed steels. High stiffness and wear resistance. Usage - Universal: Steel: P20-P50 Stainless Steel: M20-M30 Superslitin: S15-S40 < Cat. No. 5606351

Cutter insert, replaceable for VBD milling Dimensions according to enclosed catalog sheet Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P10-P30 Stainless Steel: M05-M20 Cast iron: K15-K30 Superslitz: S05-S20 Hardness: H05-H15 Terms and conditions - see enclosed photo Kat. No .: 5698901

Interchangeable milling insert APMT 1604PDER KN30, suitable replacement for APKT 1604PDER insert Coating: nano PVD, TiALN Blade material: KN30 / AP301U - suitable for common machining of steel, stainless steel, cast iron and heat-resistant alloys. Application: universal Steel: P15-P35(110-340m / min) Stainless steel: M10-M30(90-270m / min) Cast iron: K10-K30(130-410m / min) Heat-resistant steel: S10-S20(30-100m / min) Fz: 0.07-0.25mm / z Ap: 2,5-12mm Dimensions: l = 17mm d = 9,4mm s = 5,67mm < br> d1 = 4,6mm The price is for 1pc, not for the whole package, if you want to buy the whole package, put 10pcs in the basket.

Replaceable milling insert APGT 1003PDTR-AL H01, suitable replacement for APGT 1003PDER insert(type APKT 1003 for aluminum) Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Type AL: Very sharp breaker for machining aluminum and plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart.

Replaceable milling insert APGT 1604PDFR-AL H01, suitable replacement for APGT 1604PDER insert(type APKT 1604 for aluminum) Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Type AL: Very sharp breaker for machining aluminum and plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart.

Replaceable milling inserts APKT 1604PDR-GM, VBD for milling Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Original packing Material of blade: 8230 Usage: Steel: P20-P40 Stainless steel (wear-resistant): M20-M35 Cast iron: K20-K40 Non-ferrous metals (aluminum and copper): N15-N30 > Hardcover: --- Kat. No. 80008682

Replaceable milling inserts APKT 160431 - HM, VBD for milling Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Original packing Material of blade: 8240 Usage: Steel: P25-P50 Stainless steel (abrasion resistant): M20-M40 Cast iron: K20-K40 Non-ferrous metals (aluminum and copper): --- Superslitins (Ni, Co, Fe, Ti) > Hardcover: --- Kat. No. 80008764

Removable Milling Cutting Pliers APKT 1604PDR-HM, VBD for Milling Dimensions: l = 17mm d = 9,4mm s = 5,67mm d1 = 4,6mm Original packing Material of blade: 8215 Usage: Steel: P05-P20 Stainless Steel: M05-M20 Cast Iron: K05-K25 Non-Ferrous Metals (Aluminum and Copper): N05-N25 Superslitins (Ni, Co, Fe, Ti) > Hardcars: H05-H15 Cat. No .: 80014534