Abrasive fleece on shank PLN 50x30 C180, Pferd
| UNF no.4 x 48 DIN371 |
On request
|
13,96 € with VAT |
| UNF no.5 x 44 DIN371 |
On request
|
14,82 € with VAT |
| UNF no.6 x 40 DIN371 |
On request
|
15,98 € with VAT |
| UNF no.8 x 36 DIN371 |
On request
|
15,55 € with VAT |
| UNF no.10 x 32 DIN371 |
On request
|
15,79 € with VAT |
| UNF no.12 x 28 DIN371 |
On request
|
17,41 € with VAT |
| UNF 1/4" x 28 DIN371 |
On request
|
17,36 € with VAT |
| UNF 5/16" x 24 DIN371 |
On request
|
18,02 € with VAT |
| UNF 3/8" x 24 DIN371 |
On request
|
21,30 € with VAT |
| UNF 7/16" x 20 DIN374 |
In stock
(1x)
|
28,27 € with VAT |
|
In stock
(1x)
|
5,23 € with VAT | |
| UNF 1/2" x 20 DIN374 |
On request
|
28,27 € with VAT |
| UNF 9/16" x 18 DIN374 |
In stock
(1x)
|
40,46 € with VAT |
| UNF 5/8" x 18 DIN374 |
In stock
(2x)
|
37,90 € with VAT |
| UNF 3/4" x 16 DIN374 |
In stock
(2x)
|
54,99 € with VAT |
| UNF 7/8" x 14 DIN374 |
On request
|
82,32 € with VAT |
| UNF 1" x 12 DIN374 |
On request
|
72,70 € with VAT |
| UNF 1 1/8" x 12 DIN374 |
On request
|
126,95 € with VAT |
| UNF 1 1/4" x 12 DIN374 |
On request
|
130,58 € with VAT |
| UNF 1 3/8" x 12 DIN374 |
On request
|
198,92 € with VAT |
| UNF 1 1/2" x 12 DIN374 |
On request
|
334,30 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000162837
- Brand:
- PFERD
- Warranty:
- 24 months
- Code:
- PLN-5030/6-C180
Product information
PLN grinding body
Diameter 50mm ; abrasive height 30mm; Stopper 6mm (50 x 30 x 6 mm)
Grain 180
Korund C
Optimum working speed 3.600-7.500 rpm.
Stop grinding bodies consist of a nylon fleece covered with abrasive grain (Silicon Carbide). - granularity 180 - The open structure of the material lends elasticity to the tools and takes care of the cold cut. The great adaptability of the web makes sure there are no changes in surface geometry.
The optimal circumferential speed for bodies with abrasive fleece is 10-20 m / sec.
Variants
Accessories
-
Pneumatic straight grinder Extol Premium
Pneumatic grinder straight Type: GD 170 Contains clamps for clamping tools with 3mm and 6mm shank Speed ??without load: 22.000 rpm. Air consumption: 113 l / min (given by the importer, real approx. 400 l / min) Maximum working pressure: 6.3 Bar (0.63Mpa) Connection to the connecting mandrel: 1/4 "G This grinder is designed for fine grinding, deburring, milling and engraving
On request21,62 € with VAT -
Straight pneumatic grinder with abrasive set GD 170 B
Pneumatic grinder straight Speed ??without load: 22.000 / min. Air consumption: 113 l / min (given by importer, real approx. 400 l / min) Maximum working pressure: 6.3 bar (0.63 MPa) Couplings 1/4 "G Supplied with quick release coupling pin Set of abrasive bodies with 3 and 6mm stems 2 mounting keys
In stock36,29 € with VAT
Alternatives
-
Lamellar grinding wheel 30x10mm A150, shank 6mm, KLINGSPOR
Universal use on all materials Sanding disc with spindle Diameter 30mm, abrasive height 10mm, stem 6mm (30 x 10 x 6 mm) Max. / min. Grit A 150 Grit grain (corundum A) holds in a synthetic resin binder on a fabric carrier and is universally applicable to all materials. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Thanks to their flexibility, they are ideally suited to workpiece shapes. Faces are suitable for fine grinding of radii, machining of small and hard-to-reach areas. The best performance is achieved by the lamella bodies at a circumferential speed of 15-20 m / sec. Flexible shafts, electric and air direct and angle grinders can be used as propulsion machinery.
In stock3,85 € with VAT -
Lamellar grinding wheel 30x10mm P80, shank 6mm, KLINGSPOR
Universal use on all materials Sanding disc with spindle Diameter 30mm, abrasive height 10mm, stem 6mm (30 x 10 x 6 mm) Max. / min. Granularity A 80 The abrasive grain (corundum A) holds in a synthetic resin binder on a fabric carrier and is universally applicable to all materials. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Thanks to their flexibility, they are ideally suited to workpiece shapes. Faces are suitable for fine grinding of radii, machining of small and hard-to-reach areas. The best performance is achieved by the lamella bodies at a circumferential speed of 15-20 m / sec. Flexible shafts, electric and air direct and angle grinders can be used as propulsion machinery.
In stock3,85 € with VAT -
Lamellar grinding wheel 30x10mm P120, shank 6mm, KLINGSPOR
Universal use on all materials Sanding disc with spindle Diameter 30mm, abrasive height 10mm, stem 6mm (30 x 10 x 6 mm) Max. / min. Granularity A 120 The abrasive grain (corundum A) holds in a synthetic resin binder on a fabric carrier and is universally applicable to all materials. Abrasive blades on the mat are fan-shaped, radially around the tool axis. Thanks to their flexibility, they are ideally suited to workpiece shapes. Faces are suitable for fine grinding of radii, machining of small and hard-to-reach areas. The best performance is achieved by the lamella bodies at a circumferential speed of 15-20 m / sec. Flexible shafts, electric and air direct and angle grinders can be used as propulsion machinery.
In stock3,85 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!